@bgross I will look into that. Thanks for responding.
Tube change.
Hate to admit I’m at the point where I want to experiment a little but I also want to do my due diligence before making a purchase. I have tubed monoblocks each amp requires 8 kt-88 power tubes. I have read a few positive reviews regarding the Sophia electric kt-88 tubes. Does anyone with tube amplification that requires many power tubes and switched to SE have any helpful info for me?
- ...
- 25 posts total
@bgross By the way I have changed out my preamp tubes to the SE tubes over a year ago. They made a small but noticeable difference. |
I agree with Bgross. I'm guessing that you have a pair of VTL 225 amplifiers. I have a VTL ST150 so it may use the same tubes as your's. If your amps take 6350 drivers make sure that they are still strong and balanced. There's not much to be gained in rolling this tube since they were all made by Sylvania as far as I know but the triodes need to be balanced to sound their best. The 12AT7 tube contributes most of the character of the amp. My favorite 12AT7 type input tube for the amp is a Brimar 4033. It, along with a Mullard 12AT7 are wonderful in the V1 position but I think that the Brimar has a significant edge in body and drive, especially when in Triode mode. Also, try playing (within reason) with bias to fine-tune the sound of the amps to your taste as they will respond well to changes of a few millivolts. If one or two tubes stray from their bias setting by 6 or 8 mV you will sense that something is off. For the longest time I ran my amp in tetrode but after replacing the drivers it sounded fantastic in triode mode and I can't switch back. My apologies if you don't have a VTL !
|
Post removed |
Over the years, I have owned several "high end" tube-based amplifiers. With one exception, they have all been designed or optimized to run KT88's. Subsequently, I have spent a ton of money "rolling power tubes" as well as signal tubes. Currently, my tastes have taken me in a TOTALLY differently direction. Being a former classical musician, I strive to achieve the most realistic and musical reproduction from my system. To be quite frank with you, the KT88 tube has never quite satisfied my tastes, regardless of the amplifier in which they were used. I have tried almost every brand, including some very expensive NOS tubes. I have also tried CRYO treatment on several. All the results have been less than satisfying to me. Now, you mention SOPHIA ELECTRIC. That is one company that I have not tried, though I have read several professional reviews and reports, which highly praise the SOPHIA ELECTRIC products. Especially, the EL34 and the KT88 as preforming at a much superior and musical level as anything else out there. Eight SOPHIA matched tubes is a pretty big investment chunk. Also, I have no idea what the rest of your system is comprised of. I would only caution, depending on your musical tastes, that the end result might not be as dynamic as you would like to anticipate. ESPECIALLY if your tastes run toward Heavy Metal, Rock, and the like. "CICO"!! Using the SOPHIA tubes "MAY" yield subtle or more sophisticated improvements. All of which tend to be more evident if you tastes run in the direction of classical, jazz, or small ensemble music. SOMETHING TO THINK ABOUT.! |
- 25 posts total