totem model 1 owners


hi, I have a pair of model 1 signatures on the way and am curious to know how other owners have them set up. specifically, how far from the back and side walls, the room dimensions, stand height, and toe in. would also like to know which amp works well with them and if using a sub, which one? thanks!
20_20

Showing 2 responses by rbstehno

i had mine 4.5 ft from the back wall and 3.5ft from the side walls. very little toe-in with target 4 pillar stands filled with sand. i also used odyssey stratos monoblock amps. i also used a rel strata III sub. check out the cardas website to get some insight on where to start the placement of your speakers.
rel recommends using your main speakers full range with no crossover in the low freqs. the only time i would want to crossover at the lowest freqs is if i was going to crank the volume. in normal listening sessions, you would run your model 1's full range anyway. there are many subs out in the market, but very few match the quality of REL. for stands, i have always used the target 4 pillar filled with sand. they look good and are built like a tank. they weight about 150lbs each with all of the sand installed.