2. amps-preamps
  3. 168140-16768

Total System Gain Question

I am considering an amp with 25dB of gain and 575mV input sensitivity for rated minimum output, and considering a preamp with 18dB of gain. So total system gain would be 43dB. My speakers are 88dB efficient.

Is too much gain for a 2V line level DAC source? I don’t know what the input sensitivity of the preamp is. I worry I’ll be stuck in the bottom (non-linear) portion of the volume pot due to the total gain ...

I don’t have a feel for this since I’d been using an integrated amp forever.
greg7

Showing 2 responses by cleeds

Ag insider logo xs@2x
cleeds
5,691 posts
 
pragmasi
That’s a lot of gain, works out to around 2500W into 8Ω at full volume. A rule of thumb is that every 6dB of gain doubles the voltage, if you know Ohm’s law you can work out the rest.
If you ran a unity gain (0dB) preamp into that power amp it’d need to be capable of 150W into 8Ω, or with a preamp with 6dB gain around 600W
You've confused gain (and input sensitivity) with power output. They are two completely different things. There's no way to calculate power output in watts from the information the OP has provided.
Ag insider logo xs@2x
cleeds
5,691 posts
 
pragmasi
Input sensitivity, gain and power output are all related mathematically and you can work out one from the others if you assume a certain loudspeaker impedance.
There's no way to calculate power output in watts from the information the OP has provided. You simply don't know what you're talking about.

More to discover