Think I blew a driver on my Vandersteens 5A


Well, just noticed that my right channel is clearly not as loud as my left. I finally bought the analog Radio Shack sound level db meter. I really should have had one all along. It seems to be an indispensable tool. BTW, I have separate left/right gain adjustment on my preamp. So, after doing the measurement w/ the meter, I am 20db + higher in the left channel. 62db vs.82 db at below average listening levels.
Then, I went ahead and unplugged both sub amps, to eliminate the variable of it being a blown Vandy sub amp. Still, no changes w/ the meter. Then, wanted to eliminate the TT,cartridge... Played a CD, still, no changes. Had to go to work, so my troubleshooting has come to and end till later tonight. Next, I think I will run my CDP direct, to see if it may be the preamp. I would think after that, reverse the speaker wires, which of course would indicate a blown driver if the imbalance does not switch channels. I am just thinking that a 20+db difference will likely be a blown tweeter or midrange driver. It seems to be a alot to think it could be a tube in the amp or preamp. BTW, output tubes in amp bias fine.
fjn04

Showing 1 response by zargon

It is very easy to hear each of the three drivers. No need to touch them. Just move your ear up and down. It will be quite obvious if one isn't working.

It is quite likely that the problem lies in something else. It could be as simple as a poor connection or soldering joint in one of the cables.