i turn my digital theromostat from "cool" to "heat." i try for a year 'round average ambient temp of
The Heat Is On
So i guess it must be time to "winterize" our systems !!! : )
I just thought i'd start a thread about some of the things that i do when this time of year comes around, kind of like an annual ritual. It would be great if others could add their "rituals" or other things that they consider "good ideas" to this list.
First of all, i fire up the humidifiers in the house. Not only is this a health issue ( i have sinus problems ), it can and does effect how we hear things. In some cases, it can DRASTICALLY effect the performance of components. Electrostatic speakers coming to mind first and foremost. Other than this, the humidity helps to reduce static build-up and having a "shocking experience" when touching our gear or other metal objects.
The second thing that i do is rotate some of my speakers from left to right. Some of my systems have a speaker near a window ( which lets in UV rays that can cause cabinet fading and foam rot ) and has the other speaker near a heat vent ( which can also speed up foam decay ). In order to even out the "seasonal abuse" that each speaker sees, i will swap them from side to side once a year. This not only keeps the cabinets a somewhat even color ( in terms of fading ), it helps to reduce foam rot in the drivers due to the concentrated heat coming out of the vents.
Speaking of cabinets and fading, i also clean the wood on all of the speaker cabinets using a very mild concentration of Murphy's Oil soap and warm water. Once this is done, i'll typically go over the cabinets with Crisco cooking oil and a damp rag. The oil helps to feed the wood deep down and provides a very glossy finish. Due to the slightly thicker consistency, it lasts longer than other furniture polishes.
Obviously, i was just kidding about the Crisco. Thought you folks could use a good laugh for a change. Did i get ya with that one ??? : )
I actually use Lemon Oil to treat the wood after cleaning it. I typically make the rounds on all of the cabinets that need it and then go back and apply a second coat. The wood is typically pretty dry and it sucks the first coat right up. I usually do a repeat of this procedure at the beginning of summer. I really should do it more often, but just don't get around to it. The use of some type of furniture polish / protectant might do the job for a "quicky", so i'll have to check into this. I do have some lemon oil Olde English furniture polish in a spray can that i have previously used, but it does not seem to last very long. I probably need to apply "real" lemon oil and then do occasional "touch ups" as needed. I'm open to ideas and suggestions on this one : )
As mentioned in another thread, i have also equipped my racks with a "static discharge unit". This is simply a piece of metal that is electrically connected to the AC wall plate and mounted to the rack. If you are interested in doing something like this, use whatever you like that is handy, cheap and inconspicuous. This allows you to discharge any static build-up that you may have accumulated from walking across a synthetic carpet or rug prior to touching any of your gear. This mimimizes the potential damage to your sensitive digital gear, as static build-up can actually reach into the kilo-volt range.
One need not use a heavy wire to connect the "static discharge unit" to the AC ground, so don't go crazy here. 16 - 18 gauge is more than heavy enough and should be small enough to be inconspicuous at the same time. If you don't want to permanently mount a static discharge device on the rack, try using some double sided tape or use another device that is located close to your rack. The key thing here is to get into the habit of using it EVERY time you are going to touch your equipment. It may only take one good "zap" to pop your transport, dac, cd player, etc...
Something else that i've also gotten into the habit of doing is wiping down all of the plastic parts of all the gear with a cloth that has been sprayed with Static Guard. This includes, but is not limited to, the drawer mechanism inside of transports, CD players, etc... I also do this once in a while in the summer, but i tend to do it more often in the winter. I honestly do think that it helps the sonics of the system a bit, so call me crazy if you'd like. If you are going to do something like this, just make sure that you don't leave a "puddle" of moisture on the disc tray and / or bits of the cloth behind you.
Other than that, nothing else changes around here much. I go about life as i normally would in the summer, except i typically have a lot more clothes on : )
How about you folks ? Got any "winter rituals" that you'd like to share with us ? Sean
>
I just thought i'd start a thread about some of the things that i do when this time of year comes around, kind of like an annual ritual. It would be great if others could add their "rituals" or other things that they consider "good ideas" to this list.
First of all, i fire up the humidifiers in the house. Not only is this a health issue ( i have sinus problems ), it can and does effect how we hear things. In some cases, it can DRASTICALLY effect the performance of components. Electrostatic speakers coming to mind first and foremost. Other than this, the humidity helps to reduce static build-up and having a "shocking experience" when touching our gear or other metal objects.
The second thing that i do is rotate some of my speakers from left to right. Some of my systems have a speaker near a window ( which lets in UV rays that can cause cabinet fading and foam rot ) and has the other speaker near a heat vent ( which can also speed up foam decay ). In order to even out the "seasonal abuse" that each speaker sees, i will swap them from side to side once a year. This not only keeps the cabinets a somewhat even color ( in terms of fading ), it helps to reduce foam rot in the drivers due to the concentrated heat coming out of the vents.
Speaking of cabinets and fading, i also clean the wood on all of the speaker cabinets using a very mild concentration of Murphy's Oil soap and warm water. Once this is done, i'll typically go over the cabinets with Crisco cooking oil and a damp rag. The oil helps to feed the wood deep down and provides a very glossy finish. Due to the slightly thicker consistency, it lasts longer than other furniture polishes.
Obviously, i was just kidding about the Crisco. Thought you folks could use a good laugh for a change. Did i get ya with that one ??? : )
I actually use Lemon Oil to treat the wood after cleaning it. I typically make the rounds on all of the cabinets that need it and then go back and apply a second coat. The wood is typically pretty dry and it sucks the first coat right up. I usually do a repeat of this procedure at the beginning of summer. I really should do it more often, but just don't get around to it. The use of some type of furniture polish / protectant might do the job for a "quicky", so i'll have to check into this. I do have some lemon oil Olde English furniture polish in a spray can that i have previously used, but it does not seem to last very long. I probably need to apply "real" lemon oil and then do occasional "touch ups" as needed. I'm open to ideas and suggestions on this one : )
As mentioned in another thread, i have also equipped my racks with a "static discharge unit". This is simply a piece of metal that is electrically connected to the AC wall plate and mounted to the rack. If you are interested in doing something like this, use whatever you like that is handy, cheap and inconspicuous. This allows you to discharge any static build-up that you may have accumulated from walking across a synthetic carpet or rug prior to touching any of your gear. This mimimizes the potential damage to your sensitive digital gear, as static build-up can actually reach into the kilo-volt range.
One need not use a heavy wire to connect the "static discharge unit" to the AC ground, so don't go crazy here. 16 - 18 gauge is more than heavy enough and should be small enough to be inconspicuous at the same time. If you don't want to permanently mount a static discharge device on the rack, try using some double sided tape or use another device that is located close to your rack. The key thing here is to get into the habit of using it EVERY time you are going to touch your equipment. It may only take one good "zap" to pop your transport, dac, cd player, etc...
Something else that i've also gotten into the habit of doing is wiping down all of the plastic parts of all the gear with a cloth that has been sprayed with Static Guard. This includes, but is not limited to, the drawer mechanism inside of transports, CD players, etc... I also do this once in a while in the summer, but i tend to do it more often in the winter. I honestly do think that it helps the sonics of the system a bit, so call me crazy if you'd like. If you are going to do something like this, just make sure that you don't leave a "puddle" of moisture on the disc tray and / or bits of the cloth behind you.
Other than that, nothing else changes around here much. I go about life as i normally would in the summer, except i typically have a lot more clothes on : )
How about you folks ? Got any "winter rituals" that you'd like to share with us ? Sean
>
19 responses Add your response