Technics SL-10 Linear Tracking


I'm trying to break into the vinyl side of music and I would really appreciate any advice I could get on a hand-me-down from my Dad.

He hasn't used the turntable for at least 15 years, so operationally I have no idea what condition it's in.

The catch is that he misplaced the AC power cord so at the moment i cannot plug it in.

The AC power jack is a lot smaller than the standard size for audio components. The interesting thing is that there are two power supply imputs: the AC power jack and a DC power jack (12 V).

Should I just walk over to Radio Shack and pick up a 12 V universal power cord?

Finally, there is also a MM/MC button on the back, does that mean I won't need to buy a phono stage?

Thanks!

derek
mrdereklee
Does anyone have any recommendations for an under $200 phono preamp/outboard phono stage that would match well with a Technics SL-10 with the orginal 310-MC cartridge?

I've read good things about the Cambridge Audio 640P but was wondering if there were other phono preamps to consider with the exception of the NAD PP-2 phono preamp. I just didn't like it in my system.

Other members have told me to go for a used Lehmann Black Cube or the Vincent PHO-9 but both are over $350 and I don't know if I'm willing to make that much of a commitment.

I primarily use vinyl to play back classical music.

Thanks again
Jed, have you looked into the Jolida JD-9? Popular, flexible and can be found for probably right around $300 or so. If it turns out to be not your thing there's an active resale market.

SL-10 does have a built in pre that isn't the best, as I'm sure you know.
Hi Brick997

I'm going to check out the Jolida JD9. I think there is a Jolida dealer not to far away from me locally. Thanks for the heads up. I got the SL-10 hooked up with the built in pre and I'm not a happy camper. The music was faint. I double checked to make sure I had the SL-10's built-in preamp set to MC which I did and the music did play but the volume was low. When I set it to MM music was even more faint.
I've got news for you. The SL-10 does not have a built in phono amp so no wonder it sounds like crap. It just has a step up for MC or normal output (no step-up)MM. It still requires a phono stage.