2. speakers
  3. 133562-2873

Tannoy Owners: Need help with Canterbury GR fine tuning.

I recently got a pair of Canterbury GRs which have multiple adjustment on treble level and treble roll off.  I prefer the tonal balance with -2db roll off and flat treble energy setting.   The sound is more focused and balance.   The soundstage is more focused but slightly smaller.   With the treble roll off set to flat, the soundstage is wider and taller ( imaging outside of speakers ).   The very high notes of the piano deem to have longer decay ( which I like) However, there is exaggerated sibilance of human voices and a overall a little bright.   The degree of changes are somewhat cable dependent but the same trend is observed consistently observed across different cables.   

I have played with speaker positioning and toe in.   

What do you guys use for your settings and how much toe-in?

Does biwire make a big difference?

Thank you  
128x128glai
williewonka
3,075 posts
 
I know a Tannoy dealer and he recommends toe-in such that the axis of the center of the speakers crosses 8"-10" in front of the listening position.

I have this setup on my AV systems and it sounds great
e.g.
SPK1       SPK2
     \            / 
       \        /
         \    /
           \/
          /  \
      Listening
       Position

That is a lot of toe-in but it seems to work well

Regards - Steve
glai's avatar
glai OP
446 posts
 
Thanks for the suggestion.  That's also what the manual suggest.   
Do you have any soundstage wide issues using severe toe in?
williewonka
3,075 posts
 
Do you have any soundstage wide issues using severe toe in?
Not at all. I use the tannoys (as a stereo pair) on my A/V system and have often heard sounds from behind me - spooky.

The A/V system is in our living room, which I have not applied treatments to, so it is far from perfect, but it is spacious and 3D in nature

I've heard in-store tannoys in small rooms and they have a nice image oncce the toe-in is perfected

But the best I have heard them is when they are in a large room with about 6ft between the side walls and the speakers and 5-6 ft from the wall behind them - so a room about 20 ft wide x 18-20 ft deep would be optimum.

Seems the more space you give a pair of tannoy's the better they performs.

Also - if your room has bookshelves - place a layer of foam rubber on top of them - that helped with clarity in my previous house a lot

Hope that helps
Ag insider logo xs@2x
islandmandan
1,260 posts
 
Steve (Williewonka), is absolutely right. While I'm not using Canterburys, rather 12" HPD in massive cabinets (heavy), they perform the same magic described by Steve in my large room. The speakers are one-third of the way into the room, with nearly five feet to the sidewalls. I don't have mine toed-in to the extent Steve has, though I benefit from the same virtues described by Steve.

I also have no room treatments, though my room is furnished with carpeting, and large, heavy couches. You have not mentioned what you use for amplification, perhaps that aspect of your system may exacerbate the problem.

I hope you get it sorted out to your satisfaction.
Regards,
Dan
More to discover