Supra ply 3.4 vs classic 6.0

Any experiences? I am thinking about going from ply 3.4 to classic 6.0 since they were recommended by so many Merlin TSM speaker owners, which are also speakers I am using. But is there any difference between these two?

tele0901-18-2017 11:06pm

8 responses Add your response

tele09 OP Details Discussions Posts This discussion Message User 8 posts 02-05-2017 at 11:50am Copy Comment URL Report Comment Edit Delete Good point, I will test few different cables first before throwing money away, to see if I can actually hear any difference. Can't complain about the ply 3.4, just interested to see what's the fuzz is about with expensive cables.
chrisr Details Discussions Posts This discussion Message User 543 posts 02-04-2017 at 09:29pm Copy Comment URL Report Comment Edit Delete Tele09, if you have no worries throwing money on the cardas, It is a good experience. If your hifi is on budget, i would not bother with it. Yes the cardas features a really nice arrangement of wires in that cable, a marvel from a manufacturing standpoint, but really, can this be audible, if there's no difference in size?
tele09 OP Details Discussions Posts This discussion Message User 8 posts 02-02-2017 at 10:27pm Copy Comment URL Report Comment Edit Delete I wonder if I should use money for the cardas golden series cables since they were recommended, what benefits could one expect from going from 50usd supras to 1000usd cardas(Second hand)?
frazeur1 Details Discussions Posts This discussion Message User 345 posts 02-02-2017 at 05:18pm Copy Comment URL Report Comment Edit Delete I agree with most of what has been said here. I have used the Classic 6(12' pair) for a few years now, very reasonably priced and works well with my simple setup. I could have easily gotten away with less, maybe the Classic 2.5, but bigger is better, right? Not really, just half teasing there. I tried the Ply 3.4 in my system, and it too is a great cable for the money. If I had to say anything about differences that to me were audible, it would be maybe a slight more detail and very slight extended upper end. I do find my Classic 6 to be maybe a touch soft in the upper end, but very smooth. Most of Supra's products I think are great value, not hifi foo. FWIW.
bradf Details Discussions Posts This discussion Message User 329 posts 01-31-2017 at 07:12am Copy Comment URL Report Comment Edit Delete Cardas Clear Lite was recommended by Merlin Music along with a couple of other manufactures denoted in the TSM Magic owners manual
tele09 OP Details Discussions Posts This discussion Message User 8 posts 01-20-2017 at 12:41am Copy Comment URL Report Comment Edit Delete around 2,5 meters
andrei_nz Details Discussions Posts This discussion Message User 192 posts 01-19-2017 at 09:16pm Copy Comment URL Report Comment Edit Delete Agree with chrisr. As a generality a heavier gauge is better but there comes a point where there is no longer any benefit. How long are your speaker cables?
chrisr Details Discussions Posts This discussion Message User 543 posts 01-19-2017 at 05:53pm Copy Comment URL Report Comment Edit Delete I believe the Ply 3.4 is 12awg and the Classic 6.0 is 9awg. It looks like your Merlin are 8ohm nominal, going down not lower than 6.5 ohm... An easy load. So you may not benefit from the lower resistance of a mega large wire like the classic 6.0, unless your length requires it. With the ply 3.4, you have more than adequate awg and you have a lower inductance than the classic because of the cable construction... I would stick with the ply, it looks like it is the better cable, but hey classic 6 is less than $4 a foot, so it may be worth the try, and your sound will possibly change if that’s what you are looking for.

Log in to respond

More to discover

Rick Schultz Audio Apparition XLR 1.5M

ANTICABLES Level 2 "Performance Series"

6 foot Speaker wires

Silnote Audio Orion M1 Master Reference

1m Pair Ultra Pure Silver 24K State of The Art Reference