2. speakers
  3. 1266090737

Stick with Aerial 20T to play above 100Hz? Or MBL?

Hello,
I have Aerial 20T mkII, but because of room limitations I feel they output too much bass. If I am placing the 20Ts where they produce a large soundstage, which is close to the side walls, and where the midrange is fantastic I get problems in the 80Hz region. I have two Aerial SW12s and when I use these under 100Hz (and with their built-in EQ) and the 20Ts from the high pass output to play above 100Hz I am quite happy, much better result than with 20Ts alone.

This has led me to think maybe there are other speakers that would be better than the 20Ts, superb performers above 100Hz and that also would do a great job in HT, although music is no. 1 priority.

I am thinking of MBL 111f or maybe monitors like Tidal Amea Diacera.

I use my speakers in a combined 2ch/HT setup. The rest of the speakers are all Aerial Acoustics. My room is 14x18. Speakers along short wall.

What do you think?
cappuccino

Showing 1 response by klatuu

klatuu's avatar
klatuu
1 posts
 
Too bad you ordered the other speakers. I didn't see the thread until one of my clients alerted me to your problem. You don't say what processor you are using, nor do you indicate what preamp is doing your music, but I would have suggested centering the midrange at the intersection of 24 off the sidewall and 43 inches out from the front wall. This would indicate a reasonable toe in, but using the Vandersteen method of compensating for room anomalies has always worked
I use the 20Tv2 as full range, but augment them with subs for theater, and given enough power they stay under complete control.
Good luck
More to discover