In many cases(i will try to bring my point) the low efficiency speaker can be successfully driven with low-wattage amp with almost no compromise meaning "2 tone speaker with 1 tone amp" and also the other way arround: some of the efficient speakers realy need a helluvapower to drive them?...
As far as I know that's where the load plays the biggest role in the speaker. Despite all efficiency ratings tests, different freequencies will create a different load to the speaker. The speaker impedance has mainly inductive nature which has the relation X=wL where X is inductive reactance and w is natural freequency and L is inductance respectively. So on the higher freequencies the impedance is higher and respectively on the lower freequencies the driver(s) are pasing higher current i.e. create a heavier load to the amp.
To my opinion, the dB efficiency of the speaker isn't realy important parameter. Does anyone listens music higher than 100dB in their homes? I believe that there are only a few.
If you're not one of them than on the simple calculations to bring 86dB efficient speaker to the level of 100dB you will just need 35Watts.
It is possible and many of us know that it's possible to successfully build up a front end using inefficient speaker and low-powered amp(Not sometimes helpful advices such as "just listen and decide for yourself") if the speaker load is relatively stable and has only <=2Ohms load difference.
I've been experimenting with my 86dB/W/m rated Totem Forests driving them with 35W/ch Pathos towers which are 15Watts bellow the recommended power -- simply no compromise!
The different case comes when you need to "pump" a large or huge room(still I wouldn't pay attention to the dB).
BTW the main advantage of low-efficient speakers is load stability or at least a higher possibility for the load stability.
And finally I dare to agree with Bomarc about the 2 dimensions that you can trust about the speaker.
As far as I know that's where the load plays the biggest role in the speaker. Despite all efficiency ratings tests, different freequencies will create a different load to the speaker. The speaker impedance has mainly inductive nature which has the relation X=wL where X is inductive reactance and w is natural freequency and L is inductance respectively. So on the higher freequencies the impedance is higher and respectively on the lower freequencies the driver(s) are pasing higher current i.e. create a heavier load to the amp.
To my opinion, the dB efficiency of the speaker isn't realy important parameter. Does anyone listens music higher than 100dB in their homes? I believe that there are only a few.
If you're not one of them than on the simple calculations to bring 86dB efficient speaker to the level of 100dB you will just need 35Watts.
It is possible and many of us know that it's possible to successfully build up a front end using inefficient speaker and low-powered amp(Not sometimes helpful advices such as "just listen and decide for yourself") if the speaker load is relatively stable and has only <=2Ohms load difference.
I've been experimenting with my 86dB/W/m rated Totem Forests driving them with 35W/ch Pathos towers which are 15Watts bellow the recommended power -- simply no compromise!
The different case comes when you need to "pump" a large or huge room(still I wouldn't pay attention to the dB).
BTW the main advantage of low-efficient speakers is load stability or at least a higher possibility for the load stability.
And finally I dare to agree with Bomarc about the 2 dimensions that you can trust about the speaker.