Speaker Isolation -- Experience with Townshend Seismic Isolation Podiums


Over the past several months the new Townshend Seismic Isolation Podiums have been receiving some interesting and positive press. Living as I do in both an earthquake zone (Pacific NW) and in a busy urban setting with a lot of rumble from construction and passing vehicles I thought these could be worth exploring for my setup. As I was not able to find a US distributor I purchase direct from the UK (via Analogue Seduction, highly recommended). I placed an online order, with follow up to confirm the size and weight of my speakers and about six weeks later they turned up on my doorstep (the platforms are made to order with loading on the cells specific to the weight of your speakers)

The Isolation Podiums are basically four load cells attached to a robust platform onto which you stand your speakers. While not cheap ($2500 for the size I needed) they are very well designed and easy to use. For example I was concerned about being able to move my 275lb Magico Q3s up onto the platforms -- actually it was easy as the platform at 20mm is lower than the speaker spikes so it was simply a matter of unscrewing each spike and shuffling the speaker across. Once onto the platforms fine leveling was easily possible by adjusting each load cell. All in all the podium system is very well designed and works exactly as intended.

But how does it sound? With several days listening experience I cannot recommend this product too highly for anyone who wants to hear the best from their speakers. My room is custom designed with a concrete slab floor so a solid surface but of course subject to external vibration. Prior to the podiums I'd been enjoying deep and dynamic bass but had occasionally felt that the sound became congested in more dynamic and complex material. With the podiums all of this clears up. First impression may be of less bass but as is typically the case this was a result of a reduction in boom and smear and instead more of the open sound of real bass (think of a bass drum as being more "whoof" than "thump" after the initial leading edge - too often the sense of large volumes of air being displaced is lost. In addition I became much more aware of all the rhythmic leading edge detail in bass guitar passages, all the little cues the bassist is putting in. Furthermore it became much easier to resolve bass alongside other instruments. Example in point "Bye Bye Blackbird" by Nancy Harms (https://www.youtube.com/watch?v=yd4tQrndlFw). This opens with deep full bass which is a first test but then quickly becomes quite a crowded and in many systems overloaded mix. With the podium in place all of the instruments became much easier to separate and what had been a congested and even edgy mix became clear.

One final and unexpected change is how you can now more easily hear the recording venue. Listening at the start of recordings the sound of the room itself is a very low level mix of rumbles which (when it's present on the recording) is all too easy to lose -- the podiums help uncover this detail and create a much greater sense of real instruments in space. All in all I'd recommend you give these a try and no need to believe in voodoo to buy in to this tweak.
128x128folkfreak

Showing 3 responses by rcprince

I believe I have the original versions of this product, which were then called speaker cradles (bought them a good number of years ago).  I pretty much agree with you point for point, and on a suspended floor they are especially effective.  I had wondered whether part of the improvement I heard was due to raising the tweeter height a little bit, but after experimenting to take that variable out of the equation I determined that was not the case.
Thanks for the answers, the podiums are apparently a little different than the cradles.  Never used Stillpoints, though I had tried other various isolation/coupling devices under my prior speakers before settling on the Speaker Cradles, which made the biggest positive difference by far.  I now have the Nola Micro References on their stands with their pointed feet on the cradles, and found that I had to raise my listening position a little to get the best integration with the tweeters (it's best to have your ears level with those ribbons, I've found). The older platforms seem to work pretty well with those pointed feet, they may act as a drain for any energy coming from the stand.  Haven't tried it without the feet, just too old and lazy to take everything apart.
I'm not sure if the new Townshends are like my Townshend speaker cradles, but if they are keep in mind that they will raise the tweeter level of your Nolas (as they do mine).  Now this may not matter if the Stillpoints, etc. that the Nolas are on raise them to the same height as you would have with the Townshends, but it is something to consider.