Spatial Audio Raven Preamp

Hi Richard, that amplifier input load sounds very easy to drive. 1.5 volts to full clipping at 170 watts is very sensitive, and would require a quiet preamp. Any preamp, including ours, should drive it to ear-shattering levels.

As for Ralph’s point about wall-warts, lots of DACs are powered by wall-warts these days. And lots of people use the DAC as the system volume control, since that’s a common feature of many DAC chips, such as the ubiquitous ESS Sabre chipset found in entry-level and uber-expensive flagship DACs.

In an all-digital system, it’s up to the user if they want to use a separate preamp or not. In principle, a direct connection to the power amp from the DAC would have the cleanest sound. But in practice, it doesn’t always work out that way, and a dedicated linestage between the two sounds better. In that setup, the user disables the DACs volume control, so it runs at 100% output, and the preamp handles volume and signal selection.

@lynn_olson DACs are quite different from actual class D amps- the latter draw considerably more power. DACs OTOH do not- and have internal regulation. onboard with the DAC. So different kettle of fish.

There are inexpensive (less than $200 or even less than $75.00 using Texas Instruments chips) class D amps that do use wall warts but I've yet to hear one that you can take seriously.

I was thinking of the oddball use case of a wall-wart powered DAC driving a Purifi Class D amp module directly. Stupid, I know, but I bet some folks have tried it. I imagine it would (just barely) work. It certainly wouldn’t sound good, though.

Measurements would probably be fine, though, if the DAC module had a decent op-amp output buffer.

For anyone interested who perhaps has a Raven already...  Spatial has one last pair of the original pre-production Blackbird amps that they are going to sell at a discount.  David will post them on his site shortly.  If you are interested you can find them.....

I’ll amplify Don’s post. The last pair of pre-production Blackbirds are most likely the cheapest ones you will ever see. Spatial Audio Labs will try to hold the line on prices, but there are a number of imported parts in the Blackbird amplifier ... the European-made Monolith transformers, various cathode-bypass capacitors, and other key parts. If the proposed tariffs materialize, that will affect the build cost not just of our amplifier, but many other audiophile components.

I’ve got my fingers crossed the proposed tariffs never appear, but if they do, nearly all audiophile components will go up in price. If you are thinking of a major capital investment, now is the time to buy.