2. analog
  3. 1249748681

Sound quality degraded with phono-stage in path

Hello All,

I recently purchased Monolithic PS-1 (without the HC-1B power supply) phono pre-amp, last nigth I put it in between the turntable and my int-amp. I have set the cart. loading to 47K and 100pF (I'm using a Rega P1 and Super Elys MM Cart.). It now sound quality seems to have degraded it used to without the phono-pre. I'm running a generic pair of Monster cables from the pre to the it, my Tara labs cables are on their. Any ideas?
livin_262002
livin_262002 OP
187 posts
 
Headsnappin, no, I connected the the pre-out to a line level input.
livin_262002 OP
187 posts
 
Oh, forgot to mention the gain settings, I set the gain to 35db, is it too high for a 6.8mv output cart?
miracle
4 posts
 
For a 6.8mV cartridge I think 35Db is way to high.

In my bedroom I use a 6.5mV Goldring 1042 cartridge with a Aaron Phono Module II witch I've set on 23Db gain, and that seems to be just enough.
Even 25Db will give some distortion in the signal out of the preamp.

Try to set your phono at about 20-22Db gain for a start. When that's not enough go up in steps of 1Db.
livin_262002 OP
187 posts
 
Thanks, Miracle, the gain range on this pre is 26db-53db, I'll try 26db setting and see. Also, can you suggest a cartridge upgrade from what I have now? Correction I have a Rega P2.
More to discover