Sound Hi Fi Technics Jelco/SME arm upgrades

Hi Tim,I don't own a Technics 1200 but I use a Technics EPA 500 tonearm with my PTP3 slate plinthed Lenco.Some people seem to believe the 1200 tonearm only needs a rewire and the KAB damping upgrade to be a serious performer,maybe do these upgrades to the stock arm first and you may not want to spend more money for a different arm.

I would do all the KAB upgrades to the turntable and stock arm first before trying another different arm,you may think the Technics arm is plenty good enough.

Go here, download Issue 22, and read the review that starts on page 15 where the editor/publisher got the SME armboard from Sound Hi Fi of England and put a SME 309 on it. The reviewer is accustomed to $10K to $20K belt drive rigs.

That Tone Audio got me to place an order with Sound HiFi. I'm expecting the SME arm and PSU in the next few weeks. I'll let you know what I think.

Dear Tim: It is very hard to me wonder why any one can take all those " annoyances " trying to build/improve that Technics TT in any way when any one of you can buy a lot lot better ( for almost the same price. ) TT/tonearm like these ones by Technics:

http://cgi.ebay.com/Technics-SP-15-RARE_W0QQitemZ280404661355QQcmdZViewItemQQptZVintage_Electronics_R2?hash=item41496b946b#ht_3960wt_1165

http://cgi.ebay.com/TECHNICS-SP10-MKII-TURNTABLE-AUDIOPHILE-OBSIDIAN-BASE_W0QQitemZ280405222500QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4149742464#ht_500wt_1182

http://cgi.ebay.com/Technics-SP-10-Mk1-w-SH10B1-Plinth-B2-Dust-Cover_W0QQitemZ180414578628QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2a018bffc4#ht_500wt_1182

http://cgi.ebay.com/Technics-SP-10-SP-10MK2-Tonearm-Board-fits-SME-Ortofon_W0QQitemZ390102848111QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5ad3f1126f

http://cgi.ebay.com/TECHNICS-SP-15-DIRECT-DRIVE-PRO-TURNTABLE-SH-15B3-BASE_W0QQitemZ290357112338QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item439aa1ee12#ht_6743wt_1165

http://cgi.ebay.com/TECHNICS-SP-10-MARK-2-BROADCAST-QUALITY-TURNTABLE-MAN_W0QQitemZ250510755178QQcmdZViewItemQQptZAU_Electronics_Home_Audio_Turntables?hash=item3a539ac56a#ht_1063wt_1165

http://cgi.ebay.com/Technics-EPA-500-tonearm-system-original-box-extras_W0QQitemZ180414584058QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2a018c14fa#ht_668wt_1165

I can be wrong but IMHO does not make sense.

Regards and enjoy the music,
Raul.

I've had some experience with Jelco arms and their derivatives over the years, but not on my Technics. I suspect that, while the stock Technics arm is good enough, even the entry-level Jelcos are probably superior. I've just been so satisfied with the performance of the stock arm and Denon DL-103 that I've been too lazy to do the surgery.

I hope JohnnyB can update us on the result of his SME swap.

I have been living with my SME 309 and external power supply for the last two months, and I am unbelievably happy. It took me a little time and a little help from some friends to get all of it 'right', but that was a lot easier than I feared.

Setup: The instructions from Sound HiFi are great. I will say that you need to read them pretty carefully (something I did not do on the first day). Following them carefully leads to very simple steps and a pretty painless set of mods.

Sound: I did both the 309 and the external power supply at the same time so I can't isolate the impact of each. I will say that the level clarity in the midrange that I have read Johnnyb53 speak to with simple insulation of the stock tonearm came through in spades. The midrange is astounding. The second biggest impact of the change to me was a lack of noise that was almost surprising. I did not previously have any power supply tweaks or any insulation on the tonearm so I cannot ascribe that to a single mod, but the whole set up is noticeably quieter.

The intangible: The new set up seems to have the weight or kick that I was looking for. The soundstage grew in depth, and the whole setup has a stability that is impressive (a characteristic of the 1200 already, I know). As some know, I was trying to find a new TT in the $3-5000 range. I ended up investing $1700 or so in the 1200 and am VERY happy.

Let me know if you have any questions.

Tim