FWIW, as far as I can tell the differences between the FET 10 and the FET 10e is that the e series has a beefier external power supply with completely removable (and possibly upgradable?) umbilical cord, a set of XLR inputs and outputs (though neither set is truly differentially balanced), slightly different control options and layout, with different knobs and other cosmetics. I would think that the 9 series would have similar differences, and that a standard FET with e series power supply, would be at the very least comparable to a "full blown" e series.
Sonic improvement with Threshold FET 9 refurb?
Hi All,
In a recent post I was asking if anyone knew of an affordable ($1200 or so) sonic step up from my ARC SP14 preamp since a threshold FET 9 I had recently aquired from a fellow Agoner did not, to my ears. sound quite as transparent and holographic as the SP14. Very,very nice, yes, but not a step up. I didn't get any suggestions other than to upgrade the SP14 electronics and a comment that there was probably no affordable step up.
Anyway, after re-reviewing the glowing write-ups on the FET 9, I'm wondering if, despite its nearly pristine condition inside and out, my example might be a bit "tired". I realize that there is significant controversy about the need for capacitor replacement and or power supply upgrades and don't want to spend a lot of money trying to fix somethhing that is really working as well as it can, but am wondering if this might be sonically worthwhile. I would greatly appreciate hearing from anyone who has actual experience with this or a parallel scenario.
Thanks!
In a recent post I was asking if anyone knew of an affordable ($1200 or so) sonic step up from my ARC SP14 preamp since a threshold FET 9 I had recently aquired from a fellow Agoner did not, to my ears. sound quite as transparent and holographic as the SP14. Very,very nice, yes, but not a step up. I didn't get any suggestions other than to upgrade the SP14 electronics and a comment that there was probably no affordable step up.
Anyway, after re-reviewing the glowing write-ups on the FET 9, I'm wondering if, despite its nearly pristine condition inside and out, my example might be a bit "tired". I realize that there is significant controversy about the need for capacitor replacement and or power supply upgrades and don't want to spend a lot of money trying to fix somethhing that is really working as well as it can, but am wondering if this might be sonically worthwhile. I would greatly appreciate hearing from anyone who has actual experience with this or a parallel scenario.
Thanks!