Some thoughts on dust covers


Over the course of time there have been many discussions concerning the subject of dust covers.  They tend to revolve around the central question:  Should the dust cover be down or up while playing records?  Some of these discussions have been nasty, consequently I have refrained from participation.  It is hoped that I can provide some common sense that was given to me by someone of unquestioned authority many years ago.  During college and after, from 1970 to ~1980 I worked in HiFi retail, selling high end lines of audio equipment.  One of these lines was Thorens.  Sometime around 1977 or 1978, if memory serves, Thorens introduced their new TD126, as a top of the line TT with their own arm and I sold the first one at our store to very good customer.  He came back very unhappy after the first night of frustration with it.  The problem was that with the dust cover closed some of his favorite records were hitting tangentally on the very back were the platter came closest to the dust cover when it was in the closed position.  I called the manufacturer's rep and he set up a three cornered phone call with himself, the Chief Engineer of Thorens at the time, and me.  I don't recall the man's name, but it doesn't matter, it is what he said that matters, then and now.  The Chief Engineer explained that the problem was caused because the hole in the offending records was slightly off center so there was an eccentricity as such a record rotates about the spindle.  The solution was simplicity itself, the dust cover should be removed always when playing records.  That the intent of the cover is to protect the turntable when not in use.  I pointed out that we lived in a semi-arrid environment (San Diego, CA) which is dusty to which he replied that if the environment was too dusty for records it should also be considered unhealthy for people to be breathing the air.  He recommended are filtration, not dust covers to address environmental concerns.  The rep asked about air bourne feedback from speakers and the Thorens guy laughed and said that if that was a problem in a given system, relying of the dust cover was a very flimsy and ineffective solution and that proper measures should be instituted to provide meaningful distance and isolation to ameliorate the problem.   So the often offered extremes:  a) Always play your records with the dust cover down, or b) put the dust cover away in it's box and never use it, should both be recognized for what they are are - not solutions at all.  First principles:  Identify the problem(s), seek solutions and alternatives, prioritize.

billstevenson

 

noromance

hope no lasting effects, thank goodness for the weaker strains and the vaccines, Donna and I just dodged Covid, stayed with my brother in Maine for 3 days, he found his ’cold’ was Covid, we both tested neg. We flew to Tampa in Oct., we were the ONLY people wearing masks in two large airports, and everywhere we went on the 5 day trip home. I keep hearing "there’s a lot" of Covid out there.

These days, I advise wearing an N95 mask in any airport and on any airplane. You not only reduce your chances of COVID but also influenza.

Heh, I'm a bad boy!  I've repurposed one of my WallyTools cartridge-alignment tools (which are essential IMHO) that is shaped like a quarter-inch-thick LP.  It's a perfect fit on top of my platter.  No need for a dust cover, although I realize that some tables and arms need to be completely covered.  But if yours doesn't...

You can buy lucite platter covers that have a hole for spindle and handles for lifting and placing for about $60 each, somewhere on the internet. They protect the platter nicely.  

@lewm 

Wow! Really $60! I posted earlier about an acrylic platter you can buy on Amazon for $20. It doesn't have fancy handles (I've never needed) but it does the job nicely. 

https://www.amazon.com/gp/product/B01NAHMUFW

You can treat me to a double IPA for that $40 I just saved you. :)