Solid State Phono Stages


I used to be an all-tube guy, but I’ve now ventured into the realm of high-end solid state with T+A and no longer have any itch to go back heavily into tubes. Now, the only tubes I have left in my system are in my Modwright PH9.0X phono, and from what I’ve demoed against it, it seems to be a giant killer. I do love it, but I’m curious to try a higher end solid state phono stage to see what more noise and more music might sound like. Unfortunately T+A does not have a standalone phono stage, so I’m looking at other manufacturers and open to other opinions.

I currently have a Clearaudio Innovation Wood table and Air Tight PC-1s cartridge. i listen to a wide range of music, from Zeppelin to Vivaldi to Beck to Coltrane to Yello. The stage would ideally have between 65-74db of gain, maybe adjustable to 60db at minimum, and have variable impedance values. A balanced output stage would be ideal. I don’t ever really plan to have a second arm, but most stages that retail over $7K tend to have multiple inputs anyways.

My budget would be at tops ~$8K for a used unit. The unit that is sticking out to me from what I’m reading about is the Simaudio Moon 810LP. Another high on the list is the Esoteric E-02. I’ve also come across the Pass XP-27, the Gold Note PH-1000.

I’m looking for a stage with some personality in its character, not one that is overly refined. I’d love for it to be dynamic and bold when it should be, and also gentle and refined when it should be.

The only solid state stages I’ve ever owned and tried were the Pass Labs Xono, which was clean sounding but a little noisy and brittle sounding compared to a PS Audio Stellar Phono. I’ve liked all my tube phono stages better than both of those units.

I’ve also considered going further up the tube stage route, looking at Doshi 3.0, Aesthetix IO Eclipse, but I’m hesitant unless I can hear those in place. 

What solid stage phono stages have you loved, and what have you compared them to?

128x128Ag insider logo xs@2xblisshifi

Showing 4 responses by holmz

@holmz You’re probably right about me keeping the PH9.0X. Even if I did buy a solid state stage, I’m not sure I would let go of it. As a tube unit it has bested some Allnics, the Herron VTPH-2A, the Rogue Ares Magnum, and Fosgate Signature Phono. In terms of tube stages the Luxman EQ-500 also caught my attention and there is another thread where I comment on that in this forum. I’ve been advocating for the PH9.0X for years, so this is just my never ending curiosity just to say “I tried that”.

^Understood.^
It is some of this (I’ve tried that) that moved me to an upgrade.

Now looking to whether I set of a garage system with the ARC, and a cheap table, or move it on. (Etc.) It is not a high $ phono stage, but pretty good for 30+ years old.

Most of the ones you’ve mentioned should be good. I have no experience with the Sutherland, but if I was a hardcore MC guy, I would be taking a look if I had not gotten a stage with the SUTs built in.

I would suggest the transimpedance jobs are likely worth a listen to if you use MC.

(Sutherland makes one)

”And  the old Audio Research PH2 has a fair amount of hiss”… That was released in 1992… thirty years ago. 
 

My ARC PH8 had no hiss as does my REF 3. 

Yeah, probably… I got it used in ‘98… and everyone knows that the ARC should be replaced as often as possible. 😂

My new (used) phono stage is at least 20 years newer 😎.

If one is playing at ~90dB SPL the hiss is not heard between tracks. It needs to be more like 100+ dB, and the head near the speaker, to hear the hiss.

It still sounds pretty good for music, and I do not have my head in front of the tweeter listening for hissing often… so the main reason for the upgrade was to be able to use other cartridges.

You can probably discount my suggestion for the OP to stay with what they have, or at least we have an understanding that I do not replace gear without having a reason to do so.

The smartest thing is likely to stick with the Modwright PH9.0X phono. (IMO)

I had the Sim/Moon on the short list, as well as Sutherland.
It sort of depends on the cartridge though. If one is playing many cartridges then the Sim/Moon has combo that can be selected from the front panel.

If one is inclined towards MI or MM then I doubt that the transimpedance are “the go”. I am pretty sure that the Sutherland requires only MC… so no MI or MM.

And there is the SUT crowd. So whether it is “build in” or outboard, then that drives one to a different set of phono stages.

If one already has a nice phono stage then a good case can be made to just stop there.

My system has zero hiss at full volume, except with the phono stage… and the old ARC is limited to MM and 42dB (or maybe 48dB) of gain. And the ol ARC PH2 has a fair amount of hiss and low level noise… which starts to get audible a bit higher than where I normally have the volume at. So it is not bad, just it’s not perfect.
And I am limited to using only High Output coils.

Hence; I decided to upgrade the phono stage. And I have more cartridge options available.

If I had something like the Modwright PH9.0X phono, I would not likely have done so.

 

I’ve liked all my tube phono stages better than both of those units.

I got a used tube phono stage. And most are not overly “tube hungry” like a power amp can be.