2. speakers
  3. 1290694836

Silver wiring for interconnects

I recently changed internal wiring on my Merlin VSM-Mx speakers to Neotech Silver OCC5N solid core. I find sound beeing nice/smooth but still detailed even more so than original without a hint of edge/sharpness. Sound gets more fleshier/full as time goes with better soundstage. I was very sceptical before changing and it wasn´t until reading very positive reviews, especially on Neotechs, I dared.
I use Siltech and Zen silver cables in my system, hence change for better synergy.

I now consider making own IC:s from Neotech but would like to hear other opinion/ideas about: wiring thickness, isolating/damping material and design concept.
For speakers, internal wiring was isolated/damped with pure cotton, no teflon. Used 3x20awg on mid/woofer and 2x20awg on tweeter.

Many Thanks!
clabe

Showing 5 responses by clabe

clabe OP
101 posts
 
Thanks all for your helpfulness.
Hi David! I purchased the ones with teflon jacket from Parts Connexion but the cotton tube (one for every core) had to narrow internal diameter so I pulled teflon of because I prioritated thick cotton for both its dielectric and antivibrating properties useful in a "vibrant" enviroment inside speaker.

Have a nice Thanksgiving!
clabe OP
101 posts
 
Hi Face!
I´ll take that into consideration.
These silver cables are wonderful in my Merlins, so relaxed and natural sounding, no fatigue whatsoever.
Sound gets better as time goes, I read 200-400 hours before fully "burnt in". Just passed 170 hours.

Many Thanks!
clabe OP
101 posts
 
Hi Manterror!
I also believe in silver nowdays, believe production methods has improved over past years. Purity of material, OOC-method in keeping boundaries of electrons passing through to a minimum I would like to belive has a positive effect and not only theoretically.

Good Luck!
clabe OP
101 posts
 
Hi Manoterror!
I will but first I would like to ask the "audience" if any of You out there has recommendation of proper wire gauge for interconnects. I believe the bigger the signal the bigger the diameter. Therefore interconnect has smaller diameter then speaker wire.
I would imagine strand size (solid core) of 22-25 AWG,
please correct me if I´m wrong.
Also shielding and material as insulator is important, especially for smaller signals running through interconnects.

Many Thanks!
clabe OP
101 posts
 
Hi Manoterror and others!
I´ve got the IC´s assembled from Neotech yesterday. Been running constant for about 14 hours. Immediate impression was midrange blurry (like a curtain in front), now it "opened up" and sound is clearer.
I use 20 awg for each lead isolated with tube silk these are twisted together and sorrounded with copper braid. One end of braid (of each cable) is connected to ground for proper shielding. Finally I use black braid Techflex for cosmetic reason. Connectors is Eichman Silver Bullet, I use thick shrinking tube to prevent screw from connector penetrating insulating material.
Now I have to wait and hope for happy outcome.

Regards and Happy New Year!
More to discover