2. analog
  3. 1412821921

Roxio 'Easy' LP to MP3

Just bought this device to upload some audio tracks that i have remixed/mastered using an Aiwa AD-R707 analogue cassette deck.

Acc to the manual-- unless the analogue source has a pre-amp, the Roxio will have to be fed from my receiver & not directly from the RCA outs on the back of the deck or the headphone out jack on the front of the deck. The headphone out jack does not have a vol level adj.

Does anyone know if there is a pre-amp inside my AIWA or a recommendation of what might be the best way to proceed?

Ciao
roscoe50
8 responses Add your response
roscoe50 OP
44 posts
 
Merci Beacoup!!!
casey33
260 posts
 
There would be no effect whatsoever,beyond extending the signal path unnecessarily.Bring the Line Level signal out of the back of cassette player (Tape Out) to audio input on back of computer.I use an RCA at cassette end to Stereo mini plug input on Computer end.Do not use headphone jack as it is amplified.Input signal to computer must be Line Level.Otherwise you will introduce distortion.Tape Out is Line Level.Use it.
roscoe50 OP
44 posts
 
If there is no need for more elec than necessary, what would be the effect of feeding the cassette into my Amp b4 feeding the Roxioanyway.

This is after all what the manual says if there is no 'preamp' in the analogue source.

Thanks again for responses.
mofimadness's avatar
mofimadness
4,982 posts
 
RCAs on the back. The headphone output would run through a headphone amplifier. No need for more electronics in the signal path.
roscoe50 OP
44 posts
 
What would be the best--- using the headphone connection on the front of the deck or the RCA's on the back?

Thanks for responses.
casey33
260 posts
 
The Pre-amp just raises Phono to line level.The cassette is already line level.Like Mofi said,direct.You won't need Volume Adj.Roxio will set that.
roscoe50 OP
44 posts
 
The manual says turntable OR tape player....
mofimadness's avatar
mofimadness
4,982 posts
 
I'm pretty sure that the manual is referring to a PHONO preamp since this device is for mainly transferring LPs to CDs.

You should be able to go directly from the tape outputs of your Aiwa into the device.
Log in to respond
More to discover
80x80
Tien Audio
80x80
MoFi X Fender Precision Deck Limited Edition Turntable
80x80
Synergistic Research PHT - Phono Transducer
- Green Dream and Black Widow