Revel Salon 1 mid range drivers

Sorry to hear that... I had a pair or Revel and loved them but when I needed a grill it took them forever to get me one. It was only a year old and under warranty. I got every excuse why they didn’t have them and ultimately they admitted to having to take one from a new speaker.... so that experience gave me zero confidence in them should a component fail and I sold them before the warranty was up. Now that Samsung owns them I’m sure the bean counters are keeping spares at the minimum.

Try The Speaker Exchange in Tampa Fl.... they have saved the day with other brands for me, hopefully they can help you

Revel made these mid drivers themselves as they could find any that were good enough for what they wanted. They are really great mid drivers but very hard to remove ( I managed to get one out without destroying it even though the designer has said you have to damage them to get them out of the cabinet) . If they are rubbing/scratching  you may have to get new voice coils wound onto them or as in my case, there was some debris in the voice coil gap ( another post mentions the magnets peeling ) and my tech was able to remove it and reassemble the driver without destroying it but that is one tough jobs!

My 15 yr old Ultima Salon is having the same issue. I tried to take the tweeter and midrange but cannot even after taking all the screws off. It’s a beast 200lbs of a speaker to carry to a local repair shop. What to do? Any ideas?

Is there some way to warm the frame so as to possibly weaken the glue bond? Constant pulling pressure over time may loosen it up. Like removing a sticker. If you slowly pull them off the sticker won't rip. Just a guess.

So, I gave this some more thought. Now you might want to seek out other opinions about this, but what about heating the frame by touching the screw hole with a soldering iron. Getting the frame warm, but not too hot that the cone's glue comes un-done. Then using some type of hook to try and pull the frame from the seal.

I hope this is helpful.