Replacement Sonus Faber grille strings?

I checked with my local dealer. For my Cremona, the cost would be $1,000 for two grill assemblies. Ridiculous. So, we tighten up our strings by simply pulling on them and re-knotting them. On the Cremona, the string is knotted  at the bottom and does a loop over the top and back down and is knotted there.  So each length gives 2 grill strings. We just pulled on one end until both sides were  taut and re-knotted it. Pretty easy. Small hands help.

You can get elastic banding cord at most fabric stores. or craft stores. Here is one option. It is a little larger than what is on my Cremona but it could be used. I am pretty sure there are smaller sizes available. It was $3 for 5 yards at my local fabric store.

http://www.amazon.com/dp/B002XNLK88/ref=twister_B00BXQEZVU?_encoding=UTF8&psc=1

Take a look at the pictures here, especially the second one.

http://www.tapeheads.net/showthread.php?t=6007


 

I’ve seen this with the Amati’s, I believe they sag with humid days and stay that way because they’re hanging on their own weight.

Maybe if you spray/wet them with water, then dry them in the dryer, they’ll shrink a bit like a tee-shirt does when they’ve been dried in a dryer.

Cheers George

You need 1mm Fabric Elastic Cord it comes in a 328ft roll. You can purchase on EBay for about $35ea. You're going to need about 900ft. I replaced both sets on my Amati's Homage last year and they look like new.  By the way it took me three hours each.  

Have fun!!

Dtc, that photo is why I stated what I did above! I hate to think what would be involved to try and rectify those darn strings...
pjm2116. I presume you are talking of the speaker grills for the AH.
The speaker grill strings for the GH’s and I believe the other G’s are not the same diameter as the base grill strings. Replacing the base grill strings or the speaker grill strings looks to be a PITA!
As Dtc stated, the price to replace these strings from the dealer is ridiculous.
Such a shame as the speakers are very special...the strings are not, IMHO.

They are fabric\elastic try the wetting them, and then pop them in the dryer, they just need a little shrinkage, what have you got to loose.

Cheers George