Replacement for NAD 7175PE receiver? (NAD 165BEE + NAD C427 + ARC D130?)

I had two 7175 PE receivers that did exactly what you are experiencing. Disconnect everything, take the cover off, spray contact cleaner in the volume pot and turn knob back and forth. Spray cleaner in all the switches; input selector, tone controls, and balance control. Work those back and forth, push input switch buttons on and off. Should work fine after that.
I still have a 7020 down in the basement. Great amps for that era.

@buckeyefrank  - Hey Frank. Sorry it took so long to get back to you. Lost the name/contact for the vintage repair guy. Found it today.

Matt's Vintage Audio Repair

Just google it and you'll find Matt's contact information. He gets rave reviews from the folks over at the AudioKarma site. And those guys are seriously into vintage stereo.

Good luck. Hope it goes your way.

I saw this post and wanted to understand which stereo techs in the Cincinnati area @reubent would recommend for NAD 7175PE service. 

Thank you in advance for your assistance.

@rach_fan - I wouldn't necessarily take it to a NAD dealer. I would find a local independant stereo tech if possible. Fixing scratchy pots and replacing caps is a very simple repair for them and it might not be very expensive. Where do you live? If you don't know a local tech, maybe create a new post here asking for an electronics tech in your area. Or you might want to ask a local audio friend, etc. You can also go to craigslist and see if you find someone in the electronics section. Search for vintage receivers and see if a local tech is re-selling units that they have refurbished..

Here in the Cincinnati area we have a few people who do this kind of work.

Lastly, if you just want something new, go for it. But if you plan to use the ARC, it might also need cap replacement......

er... not re-tube... re-cap!

Thanks...

Intriguing!  I "fixed" the problem last year by running the pots and switches back and forth for a few minutes.  Lately, I've been doing that 10x after every listen.  The problem is back, and worsening.

So.  There are some downsides.  I don't have any electronics expertise.  I'm not sure how far I'd have to take things apart -- maybe just the cover to get at the pot, but the A/B speaker switch seems to be enclosed, and it's a problem.  The unit has seen a lot of use in 31 years.  I could order some DeoxIT, pay the bucks, wait, wait until I have a free Saturday, ... and it might or might not solve the problem.  I do wonder what kind of shape the other components are in.  Replacing caps sounds like a smart idea.  I have a dealer I trust, but he's 2 hours away.  So that would blow two Saturday afternoons, plus a chunk of change for the labor.  I know, patience is a virtue, right?  Or... I could just move on, and make this someone else's project!  Just for kicks, how much do you think an NAD dealer would charge for a full cleaning and re-tube?

As always, thanks for the advice!

-David

agree with reubent,  use Deoxit on all controls, I'd probably replace the main electrolytics and put it back in service. 

Scratchy volume and tone controls is usually just dirt/oxidation in the pots.  A quick cleaning with De-OXIT will usually resolve the issue. Just do a google search for "cleaning volume pots" and you'll find plenty of information on the subject.

If you like your receiver, you probably don't need to replace it. It may just need a little service.....