I had a low level hum that was driving me nuts with checking tubes and various possible sources when finally I realized my 2 RELs weren't on the same page. One had the ground lifted with a little switch, the other has no switch...I lifted the ground on the second REL and instantly all was quiet.
REL subwoofer using only red cable not yellow per REL technical dept
Hi,
I am using a pair of REL 5/SHO subwoofers for 2 channel application and find it mates well with my pass monoblocks and harbeth 40.2 speakers.
I called REL recently because only using minimum setting( 10 clicks ) for gain and crossover and whether newer 812 faster sub would allow me use higher crossover and gain.
REL suggested first unplug yellow wire from speaker terminal and turn up sub gain as that might improve the bass integration ..
So far sounds promising....just wanted to let others know about this possibility although YMMV....
I am using a pair of REL 5/SHO subwoofers for 2 channel application and find it mates well with my pass monoblocks and harbeth 40.2 speakers.
I called REL recently because only using minimum setting( 10 clicks ) for gain and crossover and whether newer 812 faster sub would allow me use higher crossover and gain.
REL suggested first unplug yellow wire from speaker terminal and turn up sub gain as that might improve the bass integration ..
So far sounds promising....just wanted to let others know about this possibility although YMMV....