Rein in the winter static


Winter is here and  my furnace is running, the house is dry. Playing records is a nightmare. I have a VPI prime table with the stock felt mat. The static is so bad that the mat clings to record when I remove it.

I'm also concerned about sending a static charge through the system. Any suggestions for controlling static during the winter months? I'm also wondering if a cork mat would be less conducive to static.

larseand

Showing 4 responses by lewm

Bought the FMX003 on eBay. The cost varies per the vendors, but not more than $250, probably less than $200. Comes from China. Sorry, I did not originally notice that you also asked about price.  There is an FMX004 that costs more, because it reads out to 33kV or some such very high value. The highest charge I have read on an LP that I deliberately charged up by yanking it out of its paper sleeve is about 12kV.  The Zerostat reduced that to about 0.1kV, which is about as low as the sensitivity of the meter when zeroed out.

I bought my Zerostat in 1972, but last year I bought a static charge meter to determine whether the zerostat still works. It does.

If you don’t want to spend hundreds of dollars on the CS Port or DS Audio gadgets, a Zerostat, used as directed, will remove the static electric charge from an LP surface just prior to playing,for much less money. Do not assume that any kind of de-static tool or technique, no matter how costly, is a permanent cure. You have to de-stat prior to each play, in an environment such as yours. Then you have to de-stat again, when you flip the LP over.