@Sbrownnw - Thanks for the link, that is very interesting. I don't mean to deviate from the subject but can you provide your take on the Groovetracer RP6 subplatter? What changed and do you feel it was a worthwhile investment?
Rega TT-PSU drops right channel
Hi everyone. Recently my RP6 starting dropping the right channel as soon as the needle hit the record. My routine is (with the TT-PSU powered off):
- place the record on the platter after a nitty gritty clean
- power up the TT-PSU while giving the platter a nudge
- clean record with anti-static carbon brush
- needle drop
First I thought a tonearm wire was loose on the cartridge or something along that line. But, if I switch the TT-PSU to 45 and then back to 33 my right channel works just fine. I know Regas ground to the right channel. Could something be wrong with the cable between the TT-PSU and the table? TT-PSU malfunctioning (I think it is still under warranty).
Thoughts / recommendations? TIA
- place the record on the platter after a nitty gritty clean
- power up the TT-PSU while giving the platter a nudge
- clean record with anti-static carbon brush
- needle drop
First I thought a tonearm wire was loose on the cartridge or something along that line. But, if I switch the TT-PSU to 45 and then back to 33 my right channel works just fine. I know Regas ground to the right channel. Could something be wrong with the cable between the TT-PSU and the table? TT-PSU malfunctioning (I think it is still under warranty).
Thoughts / recommendations? TIA