question for nautilus 801 owners

What are the mono blocks?

Three points.

1. I have made a lot of changes in my vinyl playback chain since getting the N801s, and each change has been starkly revealed. The most recent is the Walker Reference Phono Amp, Second Edition, and this has opened up and "naturalized" the treble to a striking degree.

2. Nevertheless, the tweeter has never been as well integrated and artifact-free as the seamless treble/midrange ESL panel balance of my InnerSound Eros. The tweeter sounds cleanest with top quality analog and gets smeared, "dirtier," and less complex with CD redbook.

3. The tweeter is padded down by 5 dB with resistors. It may be possible to work with the distributor to change the tweeter resistors to pad this down a dB or two further. Philip O'Hanlon had the distributor remove/bypass the attenuator resistors from his N801 because he wasn't getting enough treble in his very large listening room. Different strokes...go figure.

Wires are next in line. thanks
Monoblocks are bryston 7bsst(240v)

Great information steve. Actualy I should have said the treble is grainy and metalic. There is too much treble as well but room reflections are generating some this. I'm working on acoustic treatment. I just picked up a Nottingham hyperspace with ps and mounted my old rega rb300 and clearaudio v-wood cartridge. The table has made a dramatic improvement overall except it has revealed the grainy or etched treble even more.

Pre amp is bp26mm/mc. Will try more expensive phono stage much later but would imediately experiment with cables,line conditioners,tone arm, cartridge if one or all of these would make a big improvement.. Joel

Wow 801 and Bryston. It's no wonder you hear screeching. Ouch!!

Very bright and revealing equipment. Try various cables from local dealer, preferably in copper to soften presentation. How is your room setup?