Question about a set up


Hi,
As I have little knowledge around this topic I would like to ask a question and  seek advice.

The system that I am about to buy is made out of these 3 components: 

-Onkyo TX-NR 6050 receiver
-KEF - Q Series 6.5" 2-way Bookshelf speakers (pair)
-Audio Technica ATLP60 XBT Bluetooth stereo turn table


1) the receiver model and brand I wrote would work fine with those speakers?

2) the turntable would also run with the receiver I hope. is this fine ?

 

3) what kind of subwoofer would you recommend that works well with this receiver and speakers?   

I checked the nearby stores where I live and these are the available products it seems I can choose from that fits my budget:

Polk Audio PSW108 10" Powered Subwoofer
Polk Audio PSW10 10" Powered Subwoofer, 100W

Polk Audio - React 7" Wireless Subwoofer

Klipsch - Reference Series 10" 150W


Thank you all for your recommendation
Cheers

cavalerox

 

Going through your options my recommendations would only cost $200 more than your Best Buy options and result in a much better system IMHO. Plus, when everything I recommended can be delivered to your door for little/no cost there’s no reason you need to be wedded to Best Buy to purchase everything. So, for the turntable here’s the comparable BB turntable, but for only $50 more my recommendation gives you both a better tonearm and cartridge, which is a lot for 50 bucks.
https://www.bestbuy.com/site/audio-technica-at-lpw30tk-manual-belt-drive-turntable-teak/6474286.p?skuId=6474286

https://drop.com/buy/drop-audio-technica-carbon-vta-turntable

As for the AVR, I’d stick with Yamaha because I’ve compared it directly to Denon and Yammy just sounds better (I worked for Magnolia so had access to do extensive comparisons). The RX-V4A would be my choice of your options, but at BB it’s only $50 cheaper than my recommendation that offers more power and comes from the upscale Aventage line that uses higher quality parts and design. Also, it offers front L/R preamp outs if you ever want to significantly improve performance by adding a better amp or, even better, an integrated stereo amp.

For the speakers, you’re just getting much more speaker for only $100 more with the LSA speakers. They weigh 37% more and go much deeper in bass than the Q350.

So, all things considered I’d stick with my original recommendations given all the above advantages for not much more $$$. Just my $0.02 FWIW.

I just looked up the AT turntable suggested by soix. Seems like a great choice. The  the lp120 may be discontinued. The LP30 appears to have better build and tonearm. The TT you choose will have much to do regarding the sonics you obtain from your system. 

Are you fixed on the purchase of a AVR?

Thank you guys so much !  Amazing help. 

- I placed already a new order for the turntable as you recommended and I no longer am going with the one that you guys did not suggest. Thanks. 

- @mesch  :  I have no option but buying an AVR. And after reading above comments i totally changed my mind about getting the onkyo, and will go with the Yamaha.  I just need to decide which one between the 2 options. 
 

Lastly, would you please give me some cable/ wire recommendation?  to connect the TT  and speakers to the AVR what brand cables would be suitable?  Sorry for all these questions, and thank you very much for all the help you guys have given. 

 

I would recommend Blue jeans cable. They have an interconnect called the LC-1 which is a very low capacitance cable which woukd be good between TT and AVR. A very good cable for the money. 

Which speakers did you buy?

 

For speaker cables I think these are a no-brainer choice.  A respected member here compared these to much pricier cables and these performed very well especially given their very affordable price…
https://www.amazon.com/dp/B06ZZ5HCTM?ref=ppx_yo2ov_dt_b_product_details&amp&th=1

For interconnects here are some at various price points listed in order of preference…
https://www.lavricables.com/cables/reference-silver-rca-interconnects/

https://www.usaudiomart.com/details/649202094-dh-labs-bl1-series-ii-interconnects-with-neutrik-rca-plugs-2ft-or-3ft-pair/

https://www.cullencable.com/copper-series-interconnect/

https://www.monoprice.com/product?p_id=18534

Hope this helps, and congrats on the turntable!