Preamp Deal of the Century

Steve, even with all stock tubes, the microphonic issue is still bothering me. May be is the casing or inadequate damping. I had tried all sorts all isolation methods but failed. I am going to move to a bigger listening room to try it out.

Kgturner, Mick switched to PX4 tubes when he was making mine in December 2004. PX4 tubes were superior to 101D according to him. I like the PX4 sound pretty much. Later I sent it back for "upgrading" to accept 300B tubes as well. So far I prefer the PX4.

Supratek Grange Based System - My Pictures ...in case any of you might be interested, I spent some time uploading pictures and reviews of my audio system on the Audiogon Systems Ever Evolving pages. Go to:

http://forum.audiogon.com/cgi-bin/fr.pl?vevol&1146370182

Hope you enjoy looking at it...

Regards,

Steve.

Regarding the microphonics of the DHTs, I also have had considerable "challenges". The most important factor, I've found, is the sensitivity of the amplifier. With very high sensitivity amps, such as my ASL Hurricanes, the microphonics are very noticable. Yes- I can also hear my voice when speaking in the room near the preamp and no music playing. I've experimented with the PX-4s, 45s and 300Bs. I've found that the 300Bs (especially the WE)are the least sensitive to microphonics; the PX-4s and 45s the most. With a lower sensitivity amp (or placing attenuators in the line between the pre and amp), it's less noticable or goes away. Having said all this, if you can listen past the microphonics, I've found that the incredible dynamic range, musicality, transparancy and openness of the DHTs are worth the trouble. I am currently using EML 45s in my Grange. I have a Cortese modified to Grange currently for sale on Audiogon that changed out the DHTs for single triodes to offer less microphonics.

Hi Gang,

Just received an e-mail from Mick and he says the KT-88 amps are almost ready. He is very happy with the sound. They will be 60 wpc. He had to give up a little power to get the sweetness he wanted. Still, 60 watts of tube power should be enough for most applications. I am sure that these amps will be a perfect match to Mick's preamps and will probably take care of microphonic problems that other amps cause.

slowhand:

any news on pricing of the kt88?