I use a Torus RM20.
Power Conditioners
I'm looking at the Audioquest Powerquest3 and the Austere 7 Series Power. At this price point are the power conditioner sections a gimmick or can they have a meaningful impact. Is there a certain price, brand or tech which is generally the gold standard? Is power conditioning something you should only need to address if it's an actual problem (you can hear it) across your system or is it a best practice no matter and if so who is the "value" player in the space? I cringe at the thought of spending 4k on a power conditioner. Thanks for your comments.
- ...
- 16 posts total
The main problem with power conditioners is filtering. Any impedance in series affects dynamics of the power amp. Linear power supply draws current in narrow peaks of big amplitude. Amplifier demand of 1A at given time will draw about 10A in narrow pulses from mains. Filters will cause big voltage drops and loss of dynamics. I use Furman Elite 20PFi conditioner, that in addition to filtering and good non-sacrificial over/under voltage protection has big capacitor that stores energy to provide up to 55A of peak current. |
Ran the Furman with good results. Replaced with https://www.decware.com/newsite/ZLC.html which eviscerated it on all levels. System is server, DAC, tube preamp, active ATC towers. All improved when run through it. |
spotconlon OP9 posts10-17-2020 8:08pm"This Furman Elite looks interesting. The 15pfi is priced more to my liking and looks comparable except for the 45A v 55A of the 20. Any thoughts on likelihood of experiencing that kind of spike in a music-only system?" The Furman Elite-15 PFi is a quality unit with all the good stuff and is an easy recommend. Series-mode surge suppression, linear filters and Power Factor technology. As kijanki indicated above, the dynamic current demands of power amps can result in reduced dynamics due to losses associated with filter impedance. The Power Factor technology addresses that problem by providing energy storage. Audioquest offers the Niagra 3000 for $3000 if you feel in a spendy mood. Be aware that the cheaper power conditioners/suppressors do NOT have the Power Factor technology due to cost constraints. Using conditioners like this for a large, current-hungry power amp will likely prove disappointing. Good luck in your search! |
- 16 posts total