Power conditioner types

My Puritan PSM-156 powers my:

• 2 x 400watt (8Ohms)
• my 200 watt HDPlex linear power supply
• DAC non switching AC transformer
• Monitor
  

That’s a kilowatt with absolutely no loss in dynamics turned up pretty darned loud, and it has really lowered the noise floor of everything in my system. That’s good engineering.

Puritan PSM156 + 1

It has surge protection, DC removal, twin transformers to freely allow 20A current flow. Using two inductors to remove in process high frequency noise riding on the alternating current, it shunts to ground the noise from both the active (hot) and neutral (bonded to ground) back into the ground wire. An external ground can also be used, apparently with even better results, it has a slightly different potential if it’s not bonded at the panel, you will want to use the Puritan ground with that.

Shorting the high passed noise to ground is also the technology that German InAkustik uses. However, the Puritan has separate circuits isolating each outlet shunting noise to ground, so that switching power supplies (if you can swap them for linear it will yield better results - generally) won’t introduce noise into other devices plugged into it.

I did quite a lot of research before being tipped off on this little beauty. It may very well not be the best, but as far as I know, for the money, it’s a black horse that should be tried.

It has revealed a lot more information hidden by noise that my power supplies could absolutely not remove in rectification and using smoothing caps or the LT3045 in my power supply.

@mijostyn

You might need a hair conditioner or perhaps a surge protector but you already have a power conditioner. It is called a power supply.

Please explain to me where in the four way bridge rectifier, smoothing capacitors, or LT3045 it makes for perfect DC??

Anything else is a waste of money.

Unless it’s absolutely not a waste of money! Then it’s simply superior technology, that delivers a better result through impressive engineering.
But go ahead, and "know" that it’s snake oil, while those curious enough get the benefits.

I have by all reports read the Niagara range (and many even significantly more expensive conditioners) also are very good at noise removal, as are many others. Compare prices, features (an important one is surge protection another is removal of DC), and decide for yourself.

+1 Nonoise
Yes, Direct Curent removal is a winner.

What does an alternating current with direct current look like on an oscilloscope?
Instead of the alternating current rolling up and down across a zero potential line, the alternating current rides up higher, and the median of the wave rests on the direct current value.