Power Cable DIY - Please advise


Hi,

Im planning on building a pair of DIY power cables, I have shortlisted a few cables and connectors, please feel free to recommend which one to purchase.

Furutech FP TCS31
Acoustic Revive Powermax 10000
Acrolink ???
NeoTech NEP 3200

connectors... Furutech FI 28/E38 or FI50 gold or rhodium??

Thanks in Advance
narcissus

Showing 3 responses by michelzay

I tried several different brands of power cords. Finally, I realized best solution would be to make DIY PCs. Neotech is a very good choice. I have some Neotech PCs that I assembled myself. The connector side is very tricky on assembling. Neotech 3200 is an old version made ~2004 and some vendors still carries those. They have well articulated bass but somehow being shy on high frequency sides. New version of these PC are NEP-3001,2,3  MkIII which are UP-OCC Copper / Silver  Hybrid. NEP 300X III series are more balanced all over frequencies and are much better than old series.

Just be aware that Break-in period for Neotech cable and components are about >300-350 hours!!! That's what I was told by authorized Neotech representative.

Male/IEC Connectors- Furutech is basically very good. However Neotech PC are better served and sound better by using their own connectors or IeGO 8085 on male and Neotech GOld on IEC! To find the best PC, I tried Fi-11N (Male), FI-15-PLUS Gold and R, Fi-25R or G, Fi-28R or G, IEGO Gold, Silver and R. After testing, I still have some of those connectors in my storage!

BTW, IEGO Power cords are very good and well balanced with excellent sound stage too,  compared to Furutech PCs.

hope that would help ...

cheers.

Just be aware that as a marketing trick, there are some audio/electronic Chinese companies which place simply a small office in Europe but all the design/work is done in China. They pretend to be a German, Italian or Austria company to sound fancy and high quality European company in order to attract customers. One of those brands pretends to use European OCC copper which is non-sense! For audio copper cables, there are two major Japanese companies having appropriate technology to make fine copper cables. Big brands in USA and Japan even like Furutech and Oayide, they commission their orders to those Japanese companies.

Neotech is a good cable power cable especially Hybrid copper/silver version of it.

IeGO is a company based in Taiwan. Their designer used to design cables for Furutech. Their cables are very good but need some tricks to be assembled. Based on my my experience, Male and IEC side need to be of different metal. Best result that I had was to use male IEGO gold with IEC Furutech FI-15Plus or Fi-25 (or 28) gold.
some review:
http://hifi-advice.com/Furutech-IeGO-powerconnectors-review.html

They could be purchased directly at:
http://www.acoustic-fun.com/catalog/index.php?cPath=25_29&osCsid=kelnh6il3ardfed9a4pgt1d0g0

I don't have any affiliation with those companies!!!

hope that would help.
cheers,

@narcissus

- NEP-3200 has a better pronounced lower side of mid-range frequencies. This fact not only in cables but also in preamp/amp gives that impression that you hear a strong bass. High Frequencies are less pronounced. IEGO male 8085 is better suited for this cable, because it has more open HF compared to Furutech male plugs. FI-28 Rhodium gave more HF but created a less balanced sound. Using Neotech male Gold connector with their narrow sizes is a hassle on assembling for this hefty PC.

- I used NEP 3002 and 3003, and found 3003 is more open especially for front-end and preamps. I bought 3 Neotech PC and connector that I assembled my self. There is direction on this PC to put IEC which needs to be aware of.  They are very dynamic and are better that those High-Fidelity Power cords ($3000) that had for a demo! In my experience, spending money on high-priced power cords is non-sense.

Another comment, based on my experience, IEGO male gold connector is not a good match with Furutech GTX-R. It creates much less dynamic sound. The best match to keep better dynamic is to use GTX-R with Fi-28R and Fi-25R or even FI-15R! Matching Outlet metal with Male Plug is very important.

Real (!!!???)  Sonarquest plugs are not bad neither. Comared to IEGO, even in shape and mounting holes for inserting cables are totally different!!  The ones I bought from WWW.Sonarquest.net  where the fake ones. I had to request a refund from Paypal! The shape on IEC could tell you about real or fake ones!!

hope that would help
Cheers...