Possible issues with Marantz CD player


I have a Marantz CD player,  CD 6004.  Lately, I  hear  a loud  burst of  static when playing CDs. It is random, and intermittent rather than a constant buzz.  Quite pronounced. Not a hum or buzz from light dimmers or TV or the like. 
Sounds more like a skip in the CD,or like the sound a tuner would make if you were changing stations and lost the signal.  A loud squawk.  

I have tried, but so far cannot replicate it with vinyl.

It has occurred with three different CD, usually on the first song. Then it will usually play the rest without incident.

Possibly some problem with the laser?

We have two large, active German Shepherds, so I thought we might have had a tail-strike to one of the speakers.  I took the dust cover off the speaker, examined the woofer visually for tears or deterioration.
These are Klipsch Heresy IIs, so the tweeter and mid range are pretty well protected.  It looked OK, and if it were the the speaker, I'd expect to be able to replicate the issue with vinyl. 

I also checked the speaker connections, at the speaker, and at the amp. Seemed solid. 

CD player is maybe 5 years old or so, pretty much bulletproof until this, assuming it  actually is  a problem the CD player. 

Anyone had a similar issue with CD players?  Or picking up random noise in the system somewhere else?





cincinnatipete

Showing 7 responses by jafant

jjss49

Did you replace the Laser (traverse) in your Marantz player? Update me.

 

Happy Listening!

jjss49

 

Where did you purchase a replacement Laser ?

 

Happy Listening!

jjss49

Excellent! I knew that you would find a replacement Laser assembly.

 

Happy Listening!

jjss49

 

an update- did you have your Marantz player fixed/serviced ?

 

Happy Listening!

cincinnatipete

Thank You for the update. A Gold CD allows easier tracking per the player's Laser/Optical block.

Happy Listening!
jjss49

Insult to injury indeed. I am quite surprised that the Ruby has a failing laser? Recently, I took stock of a SA-11S2 player. Prior to purchase, I researched the SA-11S1, S2, S3. Only the S2 and S3 has available laser/optical blocks via Encompass (parts house in Atlanta GA).
Marantz has a few authorized repair centers here in the U.S.
Of course, parts are available for the Reference SA-10 player.

Agreed-Esoteric, Pioneer and Sony are very good spinners. 
When considering a purchase, research the specific model for available critical parts.

Happy Listening!


cincinnatipete

it certainly sounds like (no pun) the laser/optical block. Is the CD 6004 made in Japan? If so, seek out an authorized Marantz repair center.
If the player was made in china, look for a better spinner(made in Japan).

Happy Listening!