Plz advise on Denon PRA 1500/POA 2400

Wow thanks for all the replies, actually I typed in more questions but seems cut off. Anyway thanks Mechans for the details, at least now I understand their functions.

To;Hifiman5- As a newbie comparing my old integrated amp vs the denon is a world of difference in sound quality. Low,mid,highs & bass has so much clarity. And there is no audible back ground noise/distortion no matter at what levels.For the price I paid, it's performance certainly is well over my expectations. Btw what's a high current design, I only know that this poa2400 is 500 watt. And I am just using a pair of Wharfedale diamond 10.1 speakers is it suitable?

Willland: Yes for the volume I have the same oncethe volume pass after 9'o clock the power just rocks all the way! The previous owner was using a pair of vintage Klipsch floorstanders not sure of the model but he told me was 98db as well, should be the best combo as yours.

As for the poa 2400,
-do I have to set the gain at max or if I set both channels at half when listening at low volume any difference?

-At low levels this amp is actually hotter then when listening loud ?

-Is there any servicing for this 20+ yr old amp to keep it
in tip top condition. Or only fix when spoiled?

Thanks guys

My POA 1500 only put out 150 watts and was marginal with the medium efficiency speakers I was using with it. The 2400 at 500 watts must be quite the powerful beast! You should be good to use it with almost any speaker.

Hi Hifiman5- sorry think the poa 2400 consumes 500 watt but is putting out 200wpc into 8ohms.I read that too much power wouldn't blow up the speakers. But a audio shop guy actually told me I would blow up my speakers since they are only 100 watts /6ohms speakers. Any idea? But I normally wouldn't even go pass half the volume.

06-28-11: Flyinmozart
"Hi Hifiman5- sorry think the poa 2400 consumes 500 watt but is putting out 200wpc into 8ohms.I read that too much power wouldn't blow up the speakers. But a audio shop guy actually told me I would blow up my speakers since they are only 100 watts /6ohms speakers. Any idea? But I normally wouldn't even go pass half the volume."

Flyinmozart,

Just keep the volume at reasonable levels and you will be fine. Too little power can cause distortion which can damage speakers. Too much power(when blasting) can damage speakers. Be wise with the volume and enjoy the music.

Bill

Thanks Bill will certainly keep that in mind.