2. amps-preamps
  3. 1022570315

Paragon 12 preamp; need to know tubes in linestage

I HAVE A PARAGON 12 PREAMP WHICH HAS 8 X 12AX7's. NEED TO KNOW WHAT TUBES DRIVE THE LINE STAGE IN THE PREAMP...I DONT USE THE PHONO SECTION...SO I WAS TO UPGRADE THE 12AX7'S LINE STAGE ONLY. I USE AUX 1 FOR CD'S ONLY.I CAN SEND PIX'S IF NEEDED...FACING THE PREAMP LEFT TO RIGHT THEIR ARE 2 TUBES FRONT TO BACK THEN 3...THEN...2 AND...1....
THANKS,
NEAL-VITO
128x128nealvito
5 responses Add your response
memeboy
46 posts
 
Here's what I would do. Play your source. Keep gain set low on amplifier. Turn off preamp. Take out one tube. Turn on preamp. See if source still plays. Repeat process one tube at a time and see which ones can be removed without stopping the sound. Replace the ones that are necessary for sound from your source.
Post removed 
elgordo
530 posts
 
Neal - I used to be a dealer for this preamp when I had my store in the late '70s. If you care to send me your 'phone number, I'll call you during my "free weekends". Pretty sure I have a piece of literature on this unit. Don
juicymusic48
2 posts
 
If you have the unit facing you - and look down from the top - the four tubes to the farthest RIGHT (count from the right side toward the left) are the Linestage tubes.
-Mark
juicymusic48
2 posts
 
And BTW, you can pull the four phono tubes and it will work fine.
Mark
Log in to respond
More to discover
80x80
Allnic Audio H10000
80x80
McIntosh mc451
80x80
Octave Audio HP 700 SE