Oyaide Cables

Since there is some interest in Oyaide, I'll share my thoughts on the various Oyaide cables I've tried. I'm in Singapore, and we have a local dealer that makes sourcing their cables easy.

Power Cords

PA23 - Thinner than the monstrous Tunami. Good highs but a bit lightweight sounding in the bass

Black Mamba V2 - Quite neutral and detailed. Super value for money. Not as heavy handed as the Tunami.

Tunami GPX - Warm tone. Very low noise floor and very powerful bass. Some may find the top-end a bit lacking 

Tunami GPX-V2 - Improvement over the original Tunami. This is more open sounding.

Interconnects

Tunami Terzo V2 - Detailed and super smooth and laidback.

AZ910 - Similar to the Terzo V2 but with more detail.

Digital Cable

DB/DR-510 - This is the FTVS-510 bulk 75 ohm pure silver core cable with Oyaide's BNC / RCA plug with pure silver center pins. These aren't bright sounding at all, but instead have a high detailed yet warm and full balance. 

Wow, Oyaide cables are getting quite a bit of love around here. Even tho there isn’t much noise from the company or any pro reviews. I might just pull the trigger and try some their Tunami Terzo xx IC and power cord.

Order them from chuya-online from Japan.

Type in Oyaide in the search Box after you open the above Link that I posted to find what you need. I would suggest their Pre-Made Black Mamba V2 Power Cord if you can handle the White.

If you do purchase then chuya-online sends you a Confirmation e-mail which you have to respond to after review and I have responded previously with " Ship Please ".

They ship EMS Japan and there is no need going through the Cable Company as Elizabeth has noted above since you will save money ordering directly from Japan.

I discovered the Oyaide Black Mamba V2 Power Cords in the Cable Asylum.

“The idea of digital cables sounding different from one another will probably shock many people. According to some, “Bits are bits”and either the digital data is perfectly transmitted or there are drops and glitches but there shouldn’t be any “in-between”.

But the reality is different. There are no 1 and 0s running around in a digital cable. Actually, the signal being transmitted is analog in nature (square waves to be precise) and there are tiny timing errors that occur in the spdif interface (called jitter) that show up in the decoded data by the DAC. So the data being transmitted can be ”bit perfect” but the jitter will affect noticeably the analog output of a DAC. The jitter problem has been discussed extensively elsewhere, so I won’t go into the details.

Just know that jitter exist in cables and that itis measurable (see an old article from stereophile here: Stereophile: A Transport of Delight: CD Transport Jitter)

One interesting thing about that article is that jitter can be different according to the direction of the cable. Robert Harley (Stereophile) measured a cable that gave a figure of 4050ps on one direction vs 2700ps in another direction.”

Highly Recommended.

I started by building Black Mamba V2 Power Cords.

Shifted to the Tunami Terzo V2 Interconnects.

Topped it all off with the Across 3000 Speaker Cables.

If you are not experienced with building your own Cables then I suggest that you start with their pre-made products. It takes practice to work with their Cables due to the heavy duty Outer Sheath & Diameter Size.

I had to build my own Interconnects since I am using XLR To RCA. In addition, I am not too thrilled with the White Outer Sheath on the Tunami Terzo V2.

This is some of the finest Copper that I have ever seen in the limited name Brands that I have built.

I have ordered all of my Oyaide from this Trusted Seller;

https://global.rakuten.com/en/store/chuya-online/item/134625/

Also agree with ericteh above; " But the Tunami Terzo or the AR / AZ 910 are detailed yet super duper smooth and grainless ".

One more pair of Interconnects to modify and I will never look at other Cables again.

My $0.02 worth - they don't have a consistent house sound, but rather have models that cater to different taste. Some can be quite bright, while some can be full and rich.

I only have experience with their ICs and power cords. But the Tunami Terzo or the AR / AZ 910 are detailed yet super duper smooth and grainless. Warm and rich power cord ? That would be the Tunami GPX-R V2.