Ohm Super Sound Cylinder SSC-4900 initial thoughts kinda review


Recently, and partly on the basis of what I read in these pages, I purchased a pair of Ohm Super Sound Cylinder (SSC-4900) speakers. By sharing my thoughts I aim to give back here but also to provide some information I wish I could have found out when searching high and low for information on these speakers. 

Long story short I am getting back into high-end audio. I once had a pretty impressive and well curated system. For years I lived without. In the Fall of 2019 I upgraded to Amazon Music HD, which led to a pair of Audeze headphones and a headphone amp/dac. After a while I wondered how minimal of a good sounding system I could build. Some parameters I set for the speakers were they had to be full range, play loud, sound good, image well with a wide sweet spot, look good, and be less than $8000 per pair. Oh, and they had to work in a large room with hard surfaces.  

Somehow I stumbled upon Ohm. What little bit I could find suggested they were possibly right for me. More than anything the overall gestalt that they were uniquely good drew me in. That, and the seemingly reasonable price helped seal the deal. It is, however, a major issue that even though I live in the seventh largest city in the nation there was no way to see or even audition these (or really anything putatively good) before buying. Mail order is not how I bought expensive audio stuff in the past. Well, some things change. Another issue was a near complete lack of audio press on these speakers. How can a company so old, and so well thought of not have oodles of reviews from the usual suspects? 

Ok, so, after some back and forth email with Ohm I resolved to get the Super Sound Cylinder aka the SSC-4900. For some reason the speaker is listed as a Beta product on the website. Seems to be a sorted consumer product not a beta. Anyway. Clearly, any interaction with the website affirms that Ohm cares little for the website, which I can dig but it really is quite frustrating. I even had to email to find out what the switch on the back of the speaker does. I'm still not totally sure, but the switches are in the upper most position for what it's worth. Something to do with deep bass EQ and my large room size.

I had plans for a media server/dac/amp all in one. That seemed a wonderful in a minimal way. Some products of the sort are supposed to be pretty good. Well, some don't yet work with Amazon Music, and some seem to have clunky software interface, but none were powerful enough to drive the Ohms (by all accounts). Ok, so, have to get a beefy power amp. Bummer right? Big money coming on a Krell or whatever the kids buy these days. Extensive search later I ended up buying, again on very little information, an Apollon AS1200 ICEPOWER class D amp from Slovenia. Mail order all the way. Go big or go home, right?

Another long story short I bought a Bluesound Node 2i. I had, in fact, demo'd this product so I had seen it, and knew a bit about it. Importantly, it works with Amazon Music and the interface was not too clunky. I hoped it would actually work okay and drive the Apollon with at least a moderately functional volume control. I could always get a separate DAC and preamp later, right?

Got some 12-gauge MonsterCable and some cheap Audioquest interconnects. Played the cable game before. Not again. 

Speaker one arrived. A week later speaker two arrived. Had the Bluesound. Did not have the amp. Crap, okay, so I hooked up an old-ish Denon receiver the AVR-X1100 with 80 W for each of 7 channels. Great functionality in that amp btw. Before the sound, however, a word about my first impressions of the speakers. Arrived in big boxes that barely protected the speakers. Obvious hand work/cost savings. One of the metal hats was bent slightly but I'm not gonna fret. Unnervingly lightweight speaker for its size. I paid five grand for what? Honestly, the materials don't feel very magical, the fit and finish is not stellar, and the appearance, well, subjectively not too awesome. The wife did not even notice the lone speaker hanging out in the corner at first. In short, these do not look or feel like five grand well spent. But, how do they sound mister long winded?

Through the Denon receiver the Ohms did not sound very good on average. Sometimes sounded kinda okay but generally not. The Bluesound was a breeze to set up BTW. Nice bit of kit that. Perhaps the Denon could not handle the Ohms low sensitivity or impedance or so I wanted to believe.

Miraculously, the Apollon showed up two days later. Nice build, or nicer than I expected, and 620W per channel. SIX HUNDRED AND TWENTY WATTS PER CHANNEL. If, as they all said, the Ohms needed power I should clear that up with this thing. Yes by Jove, the Ohms need power. The Apollon is there and not there. I can't hear it, but it made the Ohms stand up and fly right. Things were looking up. 

I've tweaked the speakers position to be closer to the wall. They need that, they really do, which is actually good for the wife acceptance factor and with having a 5 year old kid around. Imaging is funny. It can be precise. It's not all that deep (yet?), and it's not as wide/listening position invariant as everyone says. For sure, it makes a difference where you sit. That said, the best listening location is bigger than what you get from a mini-monitor. Treble is nice. Inoffensive and perhaps lacking a bit of sparkle but far from bright. Bass, deep bass that is, is listening position sensitive. These do not plumb the depths the way I wanted them too or, indeed, the the way I was led to believe. They may benefit from a sub, which I am loathe to add. Midrange is pleasant and present, perhaps somewhat seamless maybe due to lack of crossovers. I like vocals on these speakers. Seems like they will play loud, but I've not really gotten a chance to try that yet. 

So, to sum up my first impressions... These Ohms sound better than they look. They need tons of clean power, are best close to the wall, and are not champions in any one area. They do seem quite musical as they say, but I would not go as far as some reviews and say they are super close to "being there". I like the sound, but I really had to give them a chance. They have gotten their two fair shakes. I still have about 110 days to return them. Probably won't. Need to play around a bit with placement and hear more music. Maybe I will try a big pair of Maggies. What? No, can't/won't pull them out into the room. For now, it seems I have a pretty nice and pretty minimalistic setup. Two speakers, one amp, and one other box that plays the music from a huge online library. Clean, cool, and never have to turn it off. 

Did I get what I wanted? Will the Ohms make me forget and just play the music? Maybe. I might still be an audiophile after all and the Ohms, while seemingly good, are not unicorns with sparkles and glitter farts.   
 



monstertruck9882
@mapman About 8 years ago my original amp crapped out and I grabbed a Onkyo 9070 that was on sale and it worked well enough to get me through. It is rated at 140 watts @ 4 ohms. I really struggled to find the specs for it so I have no idea what its damping factor or current is like. I hope it has enough current to push the LRS I plan on placing by its new home downstairs :) From my desperation in purchasing a new amp so fast, I realized I more or less listen to music all the time unless I am watching TV or something that needs quiet.

It was probably time to get a better unit to go with the speakers. I was really looking hard at a Hegel 390 but I just couldn’t make the stretch. Used 390s are a $1000 more than I paid new for the M33 and $4000 more if new.

Has anyone tried Dirac with Ohm Walsh Speakers?

I mean I am going to do it if just to see how the sound looks in the room but I feel like it probably is not something that would help these speakers much. Should be a fun experiment once I get them in their final position.
Well for compare I have 60w/ch Bel Canto c5i driving Ohm 100s (8" driver) and 500 w/ch Bel Canto ref1000m amps driving Ohm F5 (12" driver).

THe c5i does very well for most listening in a fairly large open area but not as loud as the much more powerful ref1000m amps.
@mapman I was looking at used Bel Canto's probably because of your posts.  They do not come up often used and don't last very long when they do.  I rarely read of someone not liking them.  

I might drag the old amp upstairs and see how it does.  Thanks for the help.  I have a set of those iso pads on the way.
@Monstertruck:

I've owned and enjoyed a pair of Ohm Walsh 4's for the past 35 years.
To me the Ohm signature sound is simply addictive; it combines the openness of stats with the dynamic impact of box speakers without the vocal colourations so common with the latter.  
The cans are currently at Ohm being re-foamed (2nd time) and tuned up.
Should get them back in a week or so.

I urge you to play and fiddle with yours till you get everything thing just right.... including the aesthetics.