ODAM capacitors.


I recently upgraded my coupling caps with VH Audio's ODAM capacitors. I have 2 outputs, one for high impedance amps, and another for low impedance amps. That being the case, a comparison between the caps on one output then the other is necessarily less than ideal. That said, I had had RTX Multicaps bypassed with Teflon V-Caps which the Odams replaced. The difference was immediate and very positive. Tone didn't change much, but detail and air increased without being bright resulting far better imaging and of course micro details. These have to be the absolute best bang for the buck capacitors, and one of the best at any cost.

128x128lous

Showing 2 responses by andirocks

@lous 

My board uses the 6922/6DJ8 tubes and I'm using NOS Siemens tubes. I didn't know there was an option for boards.

Don helped me out with some noise issues I was having in 1 channel along with giving me some tweeks to do..such as replacing some of the electrolytic caps in the P/S with film caps. I also replaced quite a few resistors with Texas Instruments TX2575, Takman metal film, and Audio Note Niobium in the audio circuit.

I used them on my Tubes4Hifi PH-16 phono preamp. Very long burn in but worth it.