NHT 2.9s - what amp is for me w/small/med budget?


Hi,

I have a pair of NHT 2.9s that sound great when connected to a good amp. Recently I borrowed a Pass Aleph 30 from a friend and they sound very good with that amp, but could possibly use more power.

Any ideas on what might be a good match for these speakers?

Thanks - Jay
jaymd1976
I really recommend biamping these speakers using the NHT SA3 bass amp for the bass (it has a volume pot so it is easily integrated with another amp) and then a sweeter amp like the Pass Aleph 30 for the mids and highs... Using the SA3 gives you a lot more opportunity to play with lower powered amps.
The SA3 is no longer in production, but can be found here or on eBay (you could also use a pair of SA2 instead; these are more common).
Good luck
Get a Rotel RB-991 or the newer RB-1080. Each has 200 watts per side. These will drive them quite well and they are alot of amp for the dollar.
Thanks - I like the idea of biamping. hmm, i'll look into the SA3, which I'm not familiar with. I guess though with the biamping you need to get some sort of control for the bass and treble. I'll have to investigate how that is best done.
Correct budgets are relative - I would like to see if I can find an amp for under 2K. Then I would still need to get a pre-amp. But I do like the idea of biamping. I think these speakers would benefit from that. They seem to be power hungry. Thanks.
Haven't heard the Rotel RB-991, but will look into that. Power sounds plenty for the NHTs. Thanks.