OP, very interesting set of parameters. I strongly recommend getting a uMik and downloading REW. The time spent learning the basics of how to measure your room will repay you many-fold.
New set up in asymmetrical room - speaker placement etc
Hi there,
First time posting here. I'm hoping for some advice on speaker placement/room treatment in my room.
My room is not symmetrical; it is 11ft wide by 12ft long. On one end of the room (lengthways) there is a bay window. The bay doesn't take up the whole width of the room but starts approx 2ft+ from the wall on either side. The bay itself is about 2ft deep and around 6ft wide.
On the wall facing the bay is a large old world cast iron radiator. To the right of this as you face it is the door to the room
On one of the long walls is is a very shallow fire breast which is 5inches deep, so shallow alcoves. The long wall opposite is featureless.
Due to the radiator and door on one short wall and the bay at the other, I have positioned my speakers either side of the firebreast. My listening position (sofa against wall/head about 12 inches from wall with cushions on top of sofa to soften reflections for the moment) is facing the fireplace at the moment about 6ft from the speakers, the speakers are a similar distance apart from one another. They are about 16inches from the back wall, and 33inches from the side walls
The room has been recently repurposed and is now a dedicated hifi room. I have recently got back in to hifi after a 20yr hiatus. I sold all my old gear very many years ago due to other life priorities, so have started again from scratch. So the room and all the equipment are new, and being absolutely bamboozled by all the acoustic information/theory/science, I was hoping to pick your brains for just some "where to start" advice.
Knowing what speakers I have would help 😊; I have a pair of Quad S2 on stands, powered by a Rega Elex-r, sourced by the Bluesound Node (2021 model) and a CDT to the Node's DAC.
I set everything up last Friday and have run the system for about 100+ hrs to burn/break everything in (Radio Paradise left running mostly, with some short listening periods) before looking at serious speaker placement/room treatment etc. I don't have the budget to fully treat the room at the moment, so am just looking for advice on where to start, and advice on what I see as problem areas of the room, and for bass/mid bloom.
Thanks very much for reading
Kind regards
Lyndon
First time posting here. I'm hoping for some advice on speaker placement/room treatment in my room.
My room is not symmetrical; it is 11ft wide by 12ft long. On one end of the room (lengthways) there is a bay window. The bay doesn't take up the whole width of the room but starts approx 2ft+ from the wall on either side. The bay itself is about 2ft deep and around 6ft wide.
On the wall facing the bay is a large old world cast iron radiator. To the right of this as you face it is the door to the room
On one of the long walls is is a very shallow fire breast which is 5inches deep, so shallow alcoves. The long wall opposite is featureless.
Due to the radiator and door on one short wall and the bay at the other, I have positioned my speakers either side of the firebreast. My listening position (sofa against wall/head about 12 inches from wall with cushions on top of sofa to soften reflections for the moment) is facing the fireplace at the moment about 6ft from the speakers, the speakers are a similar distance apart from one another. They are about 16inches from the back wall, and 33inches from the side walls
The room has been recently repurposed and is now a dedicated hifi room. I have recently got back in to hifi after a 20yr hiatus. I sold all my old gear very many years ago due to other life priorities, so have started again from scratch. So the room and all the equipment are new, and being absolutely bamboozled by all the acoustic information/theory/science, I was hoping to pick your brains for just some "where to start" advice.
Knowing what speakers I have would help 😊; I have a pair of Quad S2 on stands, powered by a Rega Elex-r, sourced by the Bluesound Node (2021 model) and a CDT to the Node's DAC.
I set everything up last Friday and have run the system for about 100+ hrs to burn/break everything in (Radio Paradise left running mostly, with some short listening periods) before looking at serious speaker placement/room treatment etc. I don't have the budget to fully treat the room at the moment, so am just looking for advice on where to start, and advice on what I see as problem areas of the room, and for bass/mid bloom.
- The early reflection point for the left speaker will be actually in the bay; on the windows are plantation shutters (open by day, closed at night). I can't imagine what effect the windows/ shutters have on the early reflection point. I imagine the shutters would give some scattering, variable on whether open or shut. Should I use a stand mounted absorber panel where the reflection point would be if the bay were not there and it was one continuous wall?
- For the right speaker, the early reflection point is where the radiator is; again, should I use a stand mount absorber here?
- For the shallow alcoves, should I use bass traps/absorbers? I don't listen to bass heavy music, but nonetheless I'm getting "bloom" I assume from bass and low-mids.
- All walls apart from where the sofa is are bare, so starting with a blank canvas, and probably need to reduce reflections generally, as I do get a little fatigue at the moment. I was thinking absorber panels on the wall behind me/listening position. The wall/firebreast directly in front of me, and the wall above the radiator I was planning on hanging art work to dampen down some of the Echo. Forgot to mention, I have a large wool rug covering most of the floor, which is oak tongue and groove laid on a suspended wooden floor.
Thanks very much for reading
Kind regards
Lyndon