2. digital
  3. 1054843474

Need help from Audio Alchemy DDE 3.0 Owners

I have owned numerous DDE 3.0s in the past, but eventually moved on to one box players. I just picked up another DDE 3.0 to use in a second system. I did get an owner's manual, but it is missing the diagram that shows the RMS output levels for the jumpers at the rear of the chassis. I desparately need this information. Could someone PLEASE let me know what the output values are for each of the 4 jumper settings?
128x128lneilb
4 responses Add your response
davehrab's avatar
davehrab
380 posts
 
I have the DDE 3.0 instruction sheets, will be glade to copy and send to you. Just email me your mailing address .

Hope this can get you started

NO/JUMPERS / 3.60 volts rms 0db
J6/J7 position 1 / 1.14 volts rms -10db
J6/J7 position 2 / 360 MILIVOLTS rms -20db
J6/J7 position 3 / 110 MILIVOLTS rms -30db
J6/J7 position 4 / 40 MILIVOLTS rms -40db

Instruction say to start at position 2 (360 milivolts) and if you need more gain move jumper to position 1 (1.14volts)

Dave
lneilb's avatar
lneilb OP
108 posts
 
Thanks Dave! Am I correct to assume that position 1 is the rear pair?
kr4's avatar
kr4
3,678 posts
 
Also, I have posted the full schematics at AudioAsylum.
lneilb's avatar
lneilb OP
108 posts
 
One other question. This unit is equipped with the remote control chip. If I remember correctly, doesn't this negate the 6db attenuation for non HDCD discs?
Log in to respond
More to discover
80x80
Aqua hifi Fomula xhd mk2
80x80
Esoteric Grandioso K1XSE
80x80
Bricasti M19