2. amps-preamps
  3. 1422195146

Move to tubes: Ayon Crossfire or Triton, various

I am contemplating a move to tubes from a solid state platform that I've loved for years with an Esoteric C-03 pre-amp and Edge NL 12.1 Stereo Amp driving Legacy AERIS speakers. See my system thread for details on the rest of the rig including interconnects, speaker cables and power conditioning/cords. Through a lot of conversations and admittedly, after reading alot of "Bugatti of Audio,..." type reviews on Ayon tube integrated and stereo tube amps, it seems that if I was aiming high (but within realm of possibility of me), my choices would be down to the Crossfire III or III PA and Triton III or III PA running in triode mode most of the time.

The C-03 and NL12.1 deliver performance, impact, dynamics, subtlety, musicality and imaging across the entire listening spectrum and frequency range based upon multiple years of owning them. They do many things that fit my personal prefs but I have heard many desirable things from moderate->expensive tube gear that I would like that much more of.

I'd be interested in feedback from people who have heard both the integrated and pure stereo versions of these products; given I love what the C-03 does for me as a pre-amp and MAY keep it in the chain, would you suggest;

- Crossfire or Triton as a baseline choice (and then III or III PA version each)?
- keep the Esoteric C-03 pre-amp and use the Ayon as pure stereo
- abandon the C-03 pre-amp as well as NL12.1 stereo SS Amp and go with an integrated amp version of the Crossfire III or Triton III?
- other Ayon offerings (Titan not reachable); see note on power reserves below....
- move up to the C-02 Master Soundworks new pre-amp from Esoteric and look at these or other pure stereo tube amps?

***I need XLR inputs....that culls out many tube amp offerings from what I have found....

Any other choices out there in the Ayon line or others I should be considering? The Legacy AERIS are incredibly efficient (96db or better) and are optimal 4-ohm loads, BUT I want power in reserve to serve dynamically challenging passages. I note that one of these Ayon models go to 35Khz, the other to 60Khz; which would you recommend based upon performance over the entire listening spectrum?

Thanks in advance, I know this will require some time to respond to; definitely appreciate the help and guidance!!!
128x128Ag insider logo xs@2xzephyr24069
charles1dad's avatar
charles1dad
10,250 posts
 
The Cable Company does have a very solid reputation. An Ayon amplifier loaner from them is likely the best route to take.
Post removed 
pepper1999
1 posts
 
I'm very late coming to this post, but decided that I had to respond to some of the issues raised here.  I have owned both the Ayon Triton (KT88s, then 120s) and the Crossfire III - the latter for nearly 4 years and the Triton before that. I have had absolutely no issues with either amp. The Crossfire is everything the reviewers say it is: musical, natural, three dimensional, with beautiful imaging and timbre. And my partner quite likes it too - well, actually, I suspect she things its much better looking than me! 

Consequently, I have no idea where this ellergy to Ayon comes from, although I suspect its derived from a mixture of jealousy, competitors who can't figure out how to offer the same quality and looks, poor distributors (through not where I come from in little old NZ; quite the reverse) and just plain ignorance. After all, who else is offering a very high quality 300B SE amp with 30watts on tap? 

One thing that you need to do with all Ayon amps, however, is throw away the standard tubes and buy some slightly more upmarket versions. Oh, and you just might have to replace the batteries in the remote after a while. I switched to Ayon from the Audio Research Ref 110, and have also owned a Music Reference RM 200 and Gryphon Diablo, so I don't have anything against American or other European gear.  

I also ended up matching an Ayon CD-T with a Hegel DAC after exhaustive testing of everything from Accustic Arts to MSB. So I guess you could say that I appreciate what Ayon actually has to offer.

For what its worth .........  



atmasphere's avatar
atmasphere
11,800 posts
 
I would not call the speaker 'incredibly efficient', its sensitivity is 94 db but because it is also 4 ohms the actual efficiency is 91 db.

But that is not so hard to drive and since the deep bass is handled by a separate amp, I think our MA-1 could do the job (it also is a fully differential balanced amp with a balanced input).

FWIW, the Manley mentioned earlier in this thread, while an excellent amp, only has the XLR connection for convenience- despite the connector, its input is single-ended. If your source is conforms to the balanced standard (AES file 48), you may encounter a buzz with this amp.
zephyr24069's avatar
Ag insider logo xs@2x
zephyr24069 OP
1,243 posts
 
Thank you both for your suggestions.  I've actually moved past this question for my setup for now and decided to stay solid-state for the foreseeable future.  I find that S/N ratio, THD and Damping Factor (the higher the better, my current amp is a champ here; it also has separate input and output transformers and only 2 gain stages) and the ability to run true balanced to be as important to the sound I wish to achieve as power rating for amps, speaker efficiency,etc...

BTW...the Legacy AERIS are not rated 94 db, the actual metric is a bit higher. My current speakers are actually 91 db if memory serves so if I ever go with tubes, I'll make sure to remember the recommendations here.  Thanks!
More to discover