2. tech-talk
  3. 1178265231

Microscope for stylus inspection

What power of magnification is adequate to determine stylus wear?
I purchased a 30X hand-held scope and checked my stylus.
It looks "as-new" i.e., like a perfect cone (Sumiko Blue Point Special).
There are no obvious flats on the sides and all seems to be fine.
I could see where the technician polished the sides and left the 0 and 180 degrees points a little "rough" as they never touch the vinyl.
Does this sound O. K. or do I need a more powerful scope?
128x128dweller
dweller's avatar
dweller OP
3,781 posts
 
Purchased at a telescope store on west Sahara in Las Vegas, NV.
Think it was around $40.00.
rodman99999
6,130 posts
 
Dweller- The seller of that album may not have ever cleaned it before playing. Grooves that are worn by styli actually sound more muted than when new, as they've been, more or less, "shaven." Dirt that has been melted into the vinyl by stylus pressure will give that crackley sound you mentioned. Then again; it could have been a noisy pressing to start with. I miss the days when most shoppes that sold cartridges, had an inspection microscope.
rayr2
66 posts
 
Hello,
They also sell a Handheld, LED Lighted 30x to 100x handheld microscope at Radio Shack for about $20.00 Its ok for the inspecting we are talking about. I know a guy that used to inspect stylii at a Stereo Shop, and is still very active in turntables, etc...and he told me that you need a minimum of 200x to begin to examine stylus wear. I dont know myself. Ray
More to discover