Michell motor is noisy:what to do?

Hi Rene,

What happened to Overhang? Yes I agree, I think the motor should be much quieter if not nearly silent. I feel as if I'm kind of stuck at the moment though. And to think this all started almost two years ago when the motor in my then table died. I had a new motor put in and it was never as quiet as the original which led me to the Gyro. I was looking at the Tecno and decided to splurge on the Gyro. My dealer is ok but my main guy left (to join the clergy no less) and he was the one who backed me that the motor should be silent. I actually just received my motor back today so hopefully I'll get a chance to listen this weekend.

On a side note no sooner had I sent my gyro motor back when my beloved Sonographe cd player decided to become very selective of what discs it wants to play (1 out of 5, maybe). I really like what I read about your AA Primo by the way.

Wes

I wonder if the quality control has gone down at Michell. My Gyro motor was perfectly quite, but couple years later after I had "downsized" and bought a new Techo, I had problems w/ the motor as well. I had the same problem as Restock and was able to fix myself w/ some advice from here and the dealer. Good luck,

TLH

Hi,
Just got, believe me or not, Michel answer. Going' to follow this manual and then return back.
Copypaste from my mailbox:

Good Morning Mikhail,

Thanks for your e.mail.

To start, you can place a small amount of oil onto the motor spindle but it needs to be applied from the bottom of the motor. Remove the cap screw from the motor top plate, lift the motor, you will need to push the motor lead back into the motor tube to create some slack and then apply a few drops of light oil to the underside of the motor.  

Regards

Steve Rowland.


J.A.Michell Engineering
2 Theobald Street,
Borehamwood,
Hertfordshire,
WD6 4SE

Gyrodec mk1 mk2 mk3 .... sometimes the small ceramic capacitor under the green off / on switch goes out of tolerance and makes the motor more noisy.

Replace the capacitor and the motor becomes silent