McIntosh MC225 questions


.

These amps are my favorite. I have two in monobloc mode. A C-41 is the pre, Tannoy DC3 speakers, and Ridge Street audio cabling. Sources: a VPI TT, & a MacMini to Ultra Fi USB DAC (a very satisfying combination especially with ripped CDs into AIFF).

I have some questions for experienced users:

Tubes:

Other than the 7591 power tubes (I'm using matched EHs right now), from your audio point of view which/what other of the amplifier tubes reveal a significant difference when tube-rolled: the two phase inverter tubes: the 12au7's?; the one voltage amplifer tube: the 12AX7?; the two drive amplifer tubes: the 12BH7s? I have NOS RCA blackplates in there mostly (as I recall).

If in your experience some or all made a difference, what in your experience in your system was that difference and what tubes did you settle on?

I've changed the fuses (HiFi Tuning), ok but nothing to get excited about; changed the power cables (cryoparts IEC adapters) to IEC Kubala-Sosna Fasicinations (significant difference in clarity and dynamics over-all); and updated (Terry DeWick) the caps, etc. as per his recommendations.

Generally, this system is the soul-satisfying system!

Thanks for your points of view,

:) listening,

Ed

.
istanbulu

Showing 2 responses by istanbulu

?

Hi Apachef1... what was it you noticed or preferred about the smooth plate tele 12ax7?

:) listening,

Ed
.

thanks Apachef1... I nabbed a couple of 12ax7 Mullard 4004s out of another preamp (has two sets, one for high gain, the other for phono... took the phono set out) and put them in the two MC225s... what a surprise... I'd say the result was exactly as you described in your post above... stronger bass and more forward midrange (including more air and pointpoint imaging in the highs).

thanks... have a great Thanksgiving...

:) listening,

Ed

.