McIntosh MB50 Media Streamer does not power on
The unit worked fine until now.
I tried to factory reset it, pressing INPUT and STANDBY/ON buttons simultaneously as per instructions. I do not recall if lights flashed after holding the two for a few sec. The reset may not have been completed. Now the unit is a brick. It won't power on. I see an LED inside glowing indicating power is reaching the motherboard, but no other sign of life.
Any help or similar experience to root out any obvious troubleshooting steps here? McIntosh MB50 manual is garbage.
Appreciate any help or ideas. Thank you!
S
The good news is there is a usb port on the back for firmware uploads. I don't see the firmware on the website but ask Mcintosh to e-mail it or send a link so you can download it. This happened to me once with a Polk S6 Playfi speaker and they sent me the firmware with instructions on how to install it. I loaded it on a thumb drive and followed the instructions, NP.
|
@Kota1 thank you, asked them. I hope McIntosh is as kind to me as they have been to you. @mahler123, this unit does not have an ethernet connection but has a USB2.0 port - a $15 usb to ethernet adapter compensates for the lack of ethernet port although it is for music streaming, not firmware. I did notice there is another mini USB port snuck underneath the unit. Given its relative inaccessibility and proximity to the middle of motherboard it appears to be dedicated for firmware uploads. |
While you are waiting on McIntosh here is how to do a manual play-fi update: https://play-fi.com/faq/entry/how-to-do-a-manual-speaker-update |
