Try this link for help:
http://www.martinloganowners.com/~tdacquis/forum/showthread.php?t=3433
http://www.martinloganowners.com/~tdacquis/forum/showthread.php?t=3433
Martin Logan help, please....
I have a pair of SL3's. Love them. Drive with Mac 402, ML 390s and 380s, REL Stadium III sub....etc. Problem: One of the panels has slipped down below the wood trim, about 1/2 inch. I cannot see, easily, how to reposition the panel. Any ideas or is it back to the factory? thanks
David
David
3 responses Add your response
Hi David, The panels are removed/accessed as follows: First you need to lay the speaker down on its side or on its back supported with a stool or box to support the top section. Use a soft blow hammer and tap upward on the bottom of the wood rail. It will relieve the tension on the pin and grove system. Do this to both sides. Make sure to not let the panel flop out. Once you have the panel back in it's proper position, you may want to do this update: http://www.martinloganowners.com/forum/showthread.php?t=3433&highlight=remove+panel Good luck, Mark |