Mark Levinson no 37 transport screw

Hello. I'm in the same position. Did you find out the specs of this screw?

I would appreciate this very much. Thank you.

Carlos

I'm sure ML tech support could tell you, it would be listed in the parts section in the service manual. Send them an email.

Cheers George

I went ahead and purchased one from ML authorized repair shop in Los Angeles - George Meyer. Cost around $75 for a screw - crazy!

Cost around $75 for a screw - crazy

True, but also thinking it could may have a specially machined head to recess into the chassis when done up. 

Cheers George

There is no way on he!! that one screw can cost $75 if ML would charge that then that's a company that I'd never buy from...just sayin

Took a 390s on trade and it didn’t have the transport screw. No response from ML so I started trying different thread sizes. It’s a 10/32. Purchased a 10/32 x 2" machine screw from Ace ($.19) and ended up cutting it to 1 1/2" and tapering the tip with a file so it catches the transport threads. Opened up the unit just to be sure and the transport was solid. Hope this helps someone else looking in the future. 

NOTE: This may not be the same for the # 37