Marantz SA8260 Direct to Amp


I'd like to run the 8260 directly into an amp. I'm trying to understand ipedance matching. I found an output level of 2.2V in the manual but cannot find an Ohm rating. Am I missing something?
pawlowski6132
im curious as to why you want to run a cdp direct into an amp? every time ive tried doing that the music sounded weak & was lacking authority,even hollow sounding.

im not knockin your plans im just puzzled as to what benifit can be had not using a preamp.

mike.
The closest you could come is with a passive unit. Don't try it otherwise as you're likely going to blow some speakers.
Warnerwh - could you elaborate more on blowing speakers when using a passive pre? In the past, I've used a passive (Placette RVC) without incident.
The 8260 doesn't have volume control. I was planning on buying an in-line attenuator. Also, here was my thinking on the situation: I have about $1,400 to spend on amplification. I thought that since I don't need to switch sources (I'm single sourced) or want balance or tone control...every dollar I spend on a preamp would be a dollar less to spend on my amp. However, now it sounds like if I do commit my entire budget on an amp the overall sound would be compromised. True?
i am not a big fan of passive.... it does offer a clean listening window, however there has always been a midbass and bass suckout (foundation of music).

if you have $1400 to spend for pre / amp. would suggest the following:

amps -
muse 160 II or pse studio v mono blocks (muse is a little easier going while the pse is very dynamic. both were $3000 amps when introduced and are still very, very good. it took a pair of classe cam mono 350 to displace the pse studio v's in my system. pse v monos go for $450-$550 and the muse 160 ii goes for $650 - $750

preamp - bat vk3...incredible build quality and sound for the money..can add phono, remote, cap upgrade later if you wish..goes for $750-$850.. the only drawback to this unit is finding nos 6922's...

if you want solid state then a ar ls-12. it was their last solid state piece and in very uderrated (very long break in period- 6 months).. it is totally neutral and transparent...you dont realize it till you actually compare it to a passive unit..goes for $800-$900... add the cap for 6db upgrade if you are running single ended source ($65)...

audible illusions L1 - magical with the pse v mono blocks..great combo..used 6922 tube but less of them..really musical unit that has a little coloration in the nicest way... works well with the pse v monos and the 8260 (i have personally used the L1,8260, and pse v's- awesome combo)

hope that helps,

mike