2. amps-preamps
  3. 1434034662

Luxman Class A Integrated Slight Buzzing Noise

Hello--

I just purchased my first class A amp--a Luxman 550ax--from an AG member recently. I noticed this morning that when I get close to the amp while it is turned on there is a slight buzzing noise coming from the unit. If looking directly at the top of the unit it seems to be coming from the right middle of the unit. Doesn't seem to affect anything with my Harbeth speakers and I only hear it from a couple feet away. I was wondering if this is normal for a class A amp. Anyone with a 550 or 590 have this issue? Any ideas what could be causing it? I have it plugged into a Richard Gray 400 Power Center using the stock Luxman two prong JPA1000 polarized power cord.

Sources are a PC connected USB to a Fostex HPA8C DAC connected to the Luxman with Transparent Audio Link 100 RCA cables.

Thanks,

Dave
ddinkel
digsmithd
913 posts
 
I would personally take it and plug direct to wall...its possible that it wont cure the transformer buzz...class a amps do run a little hotter so ?....
bojack
636 posts
 
Some transformers buzz in relation to incoming power conditions, and this may be what you are experiencing. I had an amp one time that buzzed when an outside safety light came on at nightÂ…buzz went away at 7:00AM every morning. I'd also plug it into the wall and see what happens before you check the transformer bolt.
ddinkel OP
4 posts
 
Thanks all for your input. bojack, you may be onto something with your suggestion of incoming power conditions. I haven't been able to fully investigate and haven't plugged the unit directly into the wall yet but it definitely seems worse when I play music in the early morning. I'll look into it more this week. Again, thanks all for your help.

Dave
deedo
10 posts
 
Hi Dave, I bought a 590AX March this year and went through a rather long ordeal trying to get to the bottom of what I believed to be an unacceptable buzz being emitted from the transformer, I ended up with a response from Japan. I'm willing to share the details if you're interest?
deedo
10 posts
 
I should add that I actually called Philip O'Hanlon in March when I first discovered the buzz my 590AX was making. He was very helpful and indeed I would say a gracious gentleman, he suggested I check if there was a rubber mat underneath the transfomer, which there was, this also ruled out loose transfomer bolts, which were tight as could be prior to loosening them to check for the mat, outcome was the buzz was and is still present.
More to discover