Lustre GST-801 as 2nd Arm for Raven One?

OK...I'll do some experimenting. Thanks.

Dear Kenny: I don't have any experience re-wiring a tonearm but for what I read Incognito could be a good choice. Now the headshell wires you can find/buy easy elsewhere and you change by your self.

Regards and enjoy the music.
Raul.

Raul, would an Incognito re-fit be a good choice?

Thanks

Dear Kenny: I forgot, you can/could try your Shilabe using different headshells ( additional to the Lustre one ) that give you different overall cartridge sound " presentation ".

This move IMHO it is worth to try it too along better headshell wires than the originals.

Regards and enjoy the music.
Raul.

Dear Kennythekey: I agree, worth a listen. My advise is that you try it in both ways static and dynamic balanced ( its natural design .) and make a choice for the best performance, in the static way to set-up the VTF you do it through the tonearm combination counterweight/ring ( leaving the tonearm VTF dial at cero position. )

Regards and enjoy the music.
Raul.

The Shilabe tracks 2.5 to 3.2 grams (recommend 3.0). The Lustre seems to top off at 2.5. Worth a listen.

Still a very good arm.

Dear Kenny: According my Lustre experiences IMHO your Shilabe can/could be very good " candidate "/match to the Lustre tonearm, you can try it: nothing to loose about.

Regards and enjoy the music.
Raul.

Thanks All. My stereo cartridge is the Miyajima Shilabe so I was thinking about the Lustre for a future mono setup.

Dear Kennythekey: As Dowunderpoint out I use ( between others ) two Lustre GsT-801.

IMHO it could be your " second tonearm " and depending on the cartridge you want to math it it could be your main tonearm too.

That Lustre is a very good design/build and a must to try when you already own.

Regards and enjoy the music.
Raul.

It works for non suspended turntables, so it should work fine with your Raven.

I believe Raul has two of them and likes them.

With the ability for two arms on the raven, you should at least try it as your 2nd arm. Won't cost you anything except for the arm disk insert.